<tfoot id="qqie6"></tfoot>

<ul id="qqie6"></ul>

當前位置：天津金鐳科技有限公司>>>>2"高壓控制閥

2"高壓控制閥

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品

聯系方式：銷售查看聯系方式

更新時間：2021-11-26 11:15:53瀏覽次數：205次

聯系我時，請告知來自儀表網

產品分類 品牌分類

暫無信息

天津金鐳科技有限公司

經營模式：其他

商鋪產品：31條

所在地區：天津天津市

聯系人：銷售

詢價 給他留言

產品簡介

APPLICATIONS:Fordischargeofliquidorgasfromvessels,separators,treaters,knockoutsandothersimilarliquidaccumulators

詳細介紹

APPLICATIONS:
For discharge of liquid or gas from vessels, separators, treaters, knockouts and other similar liquid accumulators.
For back pressure or pressure reducing applications with pressure pilots.
FEATURES:
Compact design
O Ring sealed seat
Valve travel indicator
Field reversible topworks
Teflon packed stuffing box
TOPWORKS:
Standard topworks have an effective diaphragm area of approximately 30 square inches for 1" and 65 square inches for 2" motor valves.
Unless otherwise specified, all HPMV's will be furnished with ductile topworks, steel topworks available. Specify when ordering.
SPRINGS:
The 1"HPMV springs are available for diaphragm pressures of 10, 20, and 30 psig.
The 2"HPMV springs are available for diaphragm pressures of 15, 20, and 30 psig.
Unless otherwise specified, all 1" HPMV's with 1/2" INNER VALVES get 30 lbs. spring others get 20 lb. spring, all 2" HPMV's will be furnished with springs as follows 1000 & 2000 lb. W.P. valves, 20 lb. springs and 4000 lb. W.P. valves, 30 lb. springs.
Top Adjusting Screw may be adjusted to vary the spring tension slightly; this affects pressure required to actuate valve.
STEM TRAVEL:
1" HPMV - 1/2" maximum
2" HPMV - 3/4" maximum
ACTUATOR WORKING PRESSURE:
10-30 psig normal (see spring ranges)
45 psig maximum
WORKING PRESSURE:
1" HPMV - 4000 psig
2" HPMV - 1000, 2000 & 4000 psig
INNER VALVE SIZES:
1" HPMV - 1/8",3/16", 1/4", 3/8", & 1/2"
2" HPMV - 1/4", 3/8", 1/2", 3/4" & 1"
2" HPMV - 7/16", 5/8" & 7/8"
*Equal Percentage requires Pt. No. 2132 Diaphragm Plate on 1 In HPMV
INNER VALVE SPECIFICATIONS:
The 1" HPMV standard valve plugs consists of a carbide ball rigidly connected to a 303 stainless steel stem. Standard seats are made of heat treated tool steel.
The 2" HPMV standard valve plugs for 1/2" and smaller consist of a carbide ball rigidly connected to a 303 stainless steel stem. Standard valve plugs for 3/4" and 1" consist of a hardened high chrome alloy ball rigidly connected to a 303 stainless steel stem. Standard seats are made of heat treated tool steel. Inner valves can be made from a wide selection of materials. Specify when ordering.
產品列表

貨號	閥芯尺寸	描述	工作壓力	維修包
E0305	1/2“	2100 SMT PO 1/2 IV	1000	R0605
E0306	3/4"	2100 SMT PO 3/4 IV	1000	R0605
E0307	1"	2100 SMT PO 1 IV	1000	R0605
E0309	1/2"	2100 SMT PC 1/2 IV	1000	R0605
E0310	1"	2100 SMT PC 1 IV	1000	R0605
E0314	1/2"	2200 SMT PO 1/2 IV	2000	R0605
E0315	3/4"	2200 SMT PO 3/4 IV	2000	R0605
E0316	1"	2200 SMT PO 1" IV	2000	R0605
E0318	1/2"	2400 SMT PO 1/2 IV	4000	R0605
E0319	3/4"	2400 SMT PO 3/4 IV	4000	R0605
E0320	1"	2400 SMT PO 1" IV	4000	R0605