<tfoot id="qqie6"></tfoot>

<ul id="qqie6"></ul>

當前位置：天津金鐳科技有限公司>>>>NV氣體背壓調節器

NV氣體背壓調節器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品

聯系方式：銷售查看聯系方式

更新時間：2021-11-26 11:12:41瀏覽次數：224次

聯系我時，請告知來自儀表網

產品分類 品牌分類

暫無信息

天津金鐳科技有限公司

經營模式：其他

商鋪產品：31條

所在地區：天津天津市

聯系人：銷售

詢價 給他留言

產品簡介

APPLICATION:Ventlinesorpressureregulationonseparators,heatertreaters,compressorstations,gasgatheringanddistribut*temswhereitisdesiredthatnogasbevented

詳細介紹

APPLICATION:
Vent lines or pressure regulation on separators, heater
treaters, compressor stations, gas gathering and distribution systems
where it is desired that no gas be vented.
? Inside Buildings
? In populated areas
? Emissions regulated areas
? Sour or poisonous gas systems
PRESSURE RANGE:
3 psig to 300psig
OPERATION:
Assume the PILOT SPRING is compressed with the ADJUSTING SCREW for a set pressure greater than theUpstream Pressure (Red). The Pilot Assembly is forced downward by the PILOT SPRING. The lower seat for the PILOT PLUG (Yellow to Blue) is closed and the upper seat for the PILOT PLUG (Red to Yellow) is open. This lets full Upstream Pressure (Red) load the MOTOR VALVE DIAPHRAGM to close the valve.
As the Upstream Pressure (Red) increases to the set pressure, the Pilot Assembly moves upward against the PILOT SPRING to first close the upper seat (Red to Yellow) and open the lower seat (Yellow to Blue). Motor Valve Diaphragm Pressure (Yellow) is vented to the Downstream (Blue).
As the Motor Valve Diaphragm Pressure (Yellow) is decreased, the Upstream Pressure (Red) acting under the motor valve seat, opens the valve. With relief of the Upstream Pressure (Red) through the valve, the Pilot Assembly assumes a position in which both seats of the PILOT PLUG are closed.
Motor Valve Diaphragm Pressure (Yellow) is regulated by the intermittent bleed pilot three-way valve action of the PILOT PLUG to reposition the Motor Valve Stem Assembly for changes in flow rate. The rapid but stable repositioning produces a true throttling action.

貨號	連接尺寸	連接方式	描述	操作壓力	工作壓力	維修包
鑄鐵材質
A1204	1"	SCRD	112 SGT BP-NV	125	175	R1820
A1205	2"	SCRD	212 SGT BP-NV	125	175	R0101
A1206	2"	FLGD	212 FGT BP-NV	125	175	R0101
A1207	2"	GRVD	212 GGT BP-NV	125	175	R0101
A1208	3"	SCRD	312 SGT BP-NV	125	175	R0102
A1209	3"	FLGD	312 FGT BP-NV	125	175	R0102
A1210	4"	SCRD	412 SGT BP-NV	125	175	R0103
A1211	4"	FLGD	412 FGT BP-NV	125	175	R0103
A1212	6"	FLGD	612 FGT BP-NV	125	175	R0104
球墨鑄鐵材質
A1204-D	1"	SCRD	130 SGT BP-NV-D	300	300	R1821
A1205-D	2"	SCRD	230 SGT BP-NV-D	300	300	R0407
A1206-D	2"	FLGD	230 FGT BP-NV-D	300	300	R0407
A1207-D	2"	GRVD	230 GGT BP-NV-D	300	300	R0407
A1208-D	3"	SCRD	330 SGT BP-NV-D	300	300	R0408
A1209-D	3"	FLGD	330 FGT BP-NV-D	300	300	R0408
A1210-D	4"	SCRD	430 SGT BP-NV-D	300	300	R0409
A1211-D	4"	FLGD	430 FGT BP-NV-D	300	300	R0409
A1212-D	6"	FLGD	630 FGT BP-NV-D	300	300	R0110