<tfoot id="qqie6"></tfoot>

<ul id="qqie6"></ul>

當前位置：天津金鐳科技有限公司>>>>300系列背壓調節器

300系列背壓調節器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品

聯系方式：銷售查看聯系方式

更新時間：2021-11-26 11:06:09瀏覽次數：116次

聯系我時，請告知來自儀表網

產品分類 品牌分類

暫無信息

天津金鐳科技有限公司

經營模式：其他

商鋪產品：31條

所在地區：天津天津市

聯系人：銷售

詢價 給他留言

產品簡介

APPLICATION:Ventlinesonoilseparators,flowtreaters,compressorstations,gasgatheringsystems

詳細介紹

APPLICATION:
Vent lines on oil separators, flow treaters, compressor stations,
gas gathering systems.

PRESSURE RANGE:
3 psig to 280 psig

OPERATION:
The Pilot Assembly and Motor Valve Stem Assembly (Crosshatched) are the only moving units in the regulator. The PILOT PLUG consists of two stainless balls rigidly connected together. The upper seat for the PILOT PLUG is the Motor Valve Diaphragm Pressure inlet (Red to Yellow). The lower seat for the PILOT PLUG is the pressure vent (Yellow to Atmosphere). The PILOT SPRING in the bonnet loads the upper side of the Pilot Assembly and is opposed on the underside by UpstreamPressure (Red).
Assume the PILOT SPRING is compressed with the ADJUSTING SCREW for a set pressure greater than the Upstream Pressure (Red). The Pilot Assembly is forced downward by the PILOT SPRING. The lower seat for the PILOT PLUG (Yellow to Atmosphere) is closed and the upper seat for the PILOT PLUG (Red to Yellow) is open. This lets full Upstream Pressure (Red) load the motor valve. The area of the MOTOR VALVE DIAPHRAGM is twice the area of the motor valve seat, assuring a positive shut-off.
As the Upstream Pressure (Red) increases to the set pressure, the Pilot Assembly moves upward against the PILOT SPRING to first close the upper seat (Red to Yellow) and open the pressure vent (Yellow to Atmosphere). As the Motor Valve Diaphragm Pressure (Yellow) is decreased, the Upstream Pressure (Red) acting under the motor valve seat, opens the valve. With relief of Upstream Pressure (Red) through the motor valve, the Pilot Assembly assumes a position in which both seats of the PILOT PLUG are closed.
The intermittent bleed pilot, three-way valve action of the PILOT PLUG against its seat adjusts the Motor Valve Diaphragm Pressure (Yellow), repositioning the Motor Valve Stem Assembly to accommodate any rate of flow. The rapid but stable repositioning produces a true throttling action.

球墨鑄鐵材質產品表（直通式）

貨號	尺寸	連接方式	描述	操作壓力	工作壓力	維修包
A1102	1"	SCRD	130 SGT BP-D	300	300	R1821
A0118	2"	SCRD	230 SGT BP-D	300	300	R0407
A0119	2"	FLGD	218 FGT BP-D	250	250	R0407
A0117	2"	GRVD	230 GGT BP-D	300	300	R0407
A0120	3"	SCRD	330 SGT BP-D	300	300	R0408
A0121	3"	FLGD	318 FGT BP-D	250	250	R0408
A0123	4"	SCRD	430 SGT BP-D	300	300	R0409
A0124	4"	FLGD	418 FGT BP-D	250	250	R0409
A0125	5"	FLGD	618 FGT BP-D	250	250	R0410

鑄鐵材質產品表

直通式
貨號	尺寸	連接方式	描述	操作壓力	工作壓力	維修包
A1101	1"	SCRD	112 SGT BP	125	175	R1820
A0101	2"	SCRD	212 SGT BP	125	175	R0101
A0102	2"	FLGD	212 FGT BP	125	175	R0101
A0103	2"	GRVD	212 GGT BP	125	175	R0101
A0104	3"	SCRD	312 SGT BP	125	175	R0102
A0105	3"	FLGD	312 FGT BP	125	175	R0102
A0106	4"	SCRD	412 SGT BP	125	175	R0103
A0107	4"	FLGD	412 FGT BP	125	175	R0103
A0108	6"	FLGD	612 FGT BP	125	175	R0104
角式
A1901	2"	SCRD	212 SGA BP	125	175	R0101

鑄鋼材質產品表

貨號	尺寸	連接方式	描述	操作壓力	工作壓力	維修包
A0702	2"	FLGD	227 FGT BP-S	285	285	R0105
A0703	3"	FLGD	327 FGT BP-S	285	285	R0106
A0704	4"	FLGD	427 FGT BP-S	285	285	R0107
A0705	6"	FLGD	627 FGT BP-S	285	285	R0108