流量計(jì) 返回列表頁(yè)

流量計(jì)FM10：

Application
The M&C flowmeters – type FM1 and FM10
– which are corrosion-resistant are used for
controlling the flow in case of aggressive
gases and liquids. The flow tube is delivered
according to your specific data, e.g. medium,
temperature, pressure.
Description
The M&C flowmeters FM1 and FM10 consist
of a glass tube (the inside is conical and
becomes enlarged in the upper sector) in
which the floating ball can move.
The substance flows through the tube from
the below part to the upper part so that the
floating ball is raised. It arises a gap between
the tube wall and the substance and creates
an equilibrium. Each level of the floating ball
corresponds to a certain flow rate which is
shown on the scale.
The sealing and connecting parts are constructively
reduced and consist only of in- and
outlet connection. All medium contacted
parts are made out of PTFE and glass. The
flowmeter is configurated in such a way that it
can easily be dismantled and cleaned.
The flowmeter FM10 is equipped with a needle
valve in the inlet which enables you to
adjust the flow rate with high precision.
• For automatic flow control the control
unit types FA... are used. Please see separate
data sheets 9.4 / 9.5 / 9.6
• For connecting the tubes, a special programme
is available. Please see separate
data sheet 11.5