The 964i is fast and easy to use so there is no excuse for using the hit-and-miss manual probing method of high voltage multi-point Hipot testing. The 964i increases operator safety by reducing exposure to high test voltages while enhancing product quality and reliability. Consistent and repeatable hipot test results are automatically documented making it simple to prove compliance with ISO 9000 quality standards.
Setting up the switching pattern for the 964i is a snap. The standard Serial interface port allows the system controller to download, verify and activate any desired switching profile you can dream up. Or if you prefer, an optional GPIB interface is also available. And if programming code is not your ideal way of spending the day, Vitrek QuickTest graphical software can get you up and running in no time at all. For those who are looking for a stａnd alone system the 964i can be controlled directly by the Vitrek V7X or 950i Series in a PC free environment. So, no matter how you like it - Vitrek puts you in control of your automated high voltage test requirement.
Now that there are no more excuses, isnt it about time you automated your high voltage test application?
Voltage Switching Ratings to 7KV, 10KV or 15KV
Product Features and Benefits
●High Voltage Ratings to 3KV, 7KV, 10KV or 15KV
●High Current Ratings to 40 Amps
●Reduces hazardous operator exposure to high voltage
●Improves test quality, consistency and repeatability
●Enhances end product quality and reliability
●Up to 64 channels in a single compact unit
●Vitrek multi-conductor Hipot Tester control ports and RS232 interfaces standard
●GPIB optionally available
●May be controlled directly by Vitrek Hipot Tester
●Available QuickTest™ graphical software with full data aquisition
●CE mark certified to EN 61010
●Made in the U.S.A.
The below is a schematic representation of two 8 channel scanning modules. One is connected to the high voltage output of the tester and the other to the return sense. This configuration provides bi-polar test capability for the 8 test points. Additional cards and units can be added for greater capacity.
HV7 Series - 7KV High Voltage Switch Card
Maximum Switching Voltage | 7kVDC, 5kVAC RMS 50-60Hz |
Maximum Switching Current | 2A DC or RMS AC |
Maximum Switching Power | 50 Watts |
Relay Switching Time | 4mS (from applied coil current) |
Relay Configuration | Form A, SPST Normally Open |
HV7 Series Switch Card Configuration:
HV7-8R 7KV Single input bus 8 output relays terminated in Red HV terminals,
HV7-8B 7KV Single input bus 8 output relays terminated in Black HV terminals
HV7-4B 7KV Single input bus 4 output relays terminated in Black HV terminals
HV7-MX2 Dual input Single output MUX Card (selectable HV or continuity capability)
HV10 Series - 10kV High Voltage Switch Card
Maximum Switching Voltage | 11kVDC, 8kVAC RMS 50-60Hz |
Maximum Switching Current | 2A DC or RMS AC |
Maximum Switching Power | 50 Watts |
Relay Switching Time | 4mS including debounce |
Relay Configuration | Form A, SPST Normally open |
HV10 Series Switch Card Configuration:
HV10-8R 10KV Single input bus 8 output relays terminated in Red HV terminals,
HV10-8B 10KV Single input bus 8 output relays terminated in Black HV terminals
HV10-4R 10KV Single input bus 4 output relays terminated in Red HV terminals
HV10-4B 10KV Single input bus 4 output relays terminated in Black HV terminals
HV10-MX2 Dual input Single output MUX Card (selectable HV or continuity capability)
HV15 Series High Voltage Switch Card:
Maximum Switching Voltage | 15kVDC, 10kVAC RMS 50-60Hz |
Maximum Switching Current | 2A DC or RMS AC |
Maximum Switching Power | 50 Watts |
Relay Switching Time | 4mS including debounce |
Relay Configuration | Form A, SPST Normally open |
HV15 Series Switch Card Configuration:
HV15-8R 15KV Single input bus 8 output relays terminated in Red HV terminals,
HV15-8B 15KV Single input bus 8 output relays terminated in Black HV terminals
HV15-4R 15KV Single input bus 4 output relays terminated in Red HV terminals
HV15-4B 15KV Single input bus 4 output relays terminated in Black HV terminals
HV15-MX2 Dual input Single output MUX Card (selectable HV or continuity capability)
Maximum Input Voltage | 700 VDC, 50 VAC RMS |
Maximum Switching Voltage | 277VAC, 30VDC |
Maximum Current | 40A DC or RMS AC |
Relay Switching Power | 500 Watts |
Card Configuration | 4 channels of high current relays and 4 channels of sense relays |
Relay Configuration | All Form A, SPST Normally open |
HC-4 High Current Switch Card Configuration:
HC-7 70 Amp High Current Source & Sense Switch Card
Maximum Input Voltage | 700 VDC, 500 VAC RMS |
Maximum Switching Voltage | 277VAC, 30VDC |
Maximum Current | 70A DC or RMS AC |
Relay Switching Power | 500 Watts |
Card Configuration | 4 channels of high current relays and 4 channels of sense relays |
Relay Configuration | All Form A, SPST Normally open |
HC-7 High Current Switch Card Configuration:
Switch Card Capacity | Holds up to 8 switch cards |
High Voltage Terminals | All HV terminals are 15KV rated and supplied with mating connector, optional HV leads sets available on request |
Remote Interface | GPIB optional, RS232 standard |
Indicators | Full LCD Display |
Diagnostics | Built-in self diagnostics test ROM and RAM |
Operating Temperature | 0°C to 50°C |
Humidity | 80% RH 0°C to 40°C |
Power | 115/230 VAC +/- 10% VA max |
Dimensions | 89mmH x 432mmW x 485mmD (3.5"H x 17"W x 19"D) |
Weight | 12Kg (27 lb.) Net/16Kg (36 lb.) Shipping |
Standard Accessories | Operators manual, hipot connection test leads and power cord |
Warranty | 1 year parts and labor |
Safety | CE mark certified to EN61010 |
