產(chǎn)品描述：
SDT-FUINTTEMP170測(cè)溫接口
Description
This "Digital Thermocouple Interface" allows any or type thermocouple to be connected via this interface with the SDT 170M and SDT 170MD Multifunction Ultrasonic Detectors. The temperature can be read out in degrees Celsius, Kelvin, Fahrenheit and Rankin. It can be used to check any kind of temperature that can be measured with a thermocouple. Designed for use in an industrial environment, the interface is made out of a rugged metal casing, and has a miniature thermocouple connector. The interface has on board digital cold junction compensation and is equipped with a wire break or hermocouple not present?detector.
The SDT 170 automatically senses the presence of the thermocouple interface and switches its readout to the appropriate setting, scales and units. Measurements can be time-dated and logged inside the memory of the SDT 170M and SDT 170MD versions. Refer to the SDT 170 documentation for data logging limits and possibilities.
Technical Data:
Thermocouples: types "J" and "K" (user selectable, not automatic) With a standard miniature thermocouple connector
Dimensions of plug: 7.9 mm or 0.312 inch, center to center.
Operating temperature: -20 to 60/ -4 to 140
Operating humidity: 0 % to 90 % R.H. when
temperature is less than 35/95; 0 % to 70 % R.H.
when temperature is above 35/95
Temperature stability: 0.05 / 0.09
Interface dimensions: 108 x 73 x 23 mm / 4.3 x 2.9x 0.9 inch
Interface weight: 106 gram / 0.36 lb
Includes connection cable to the SDT 170 – Does not include the thermocouple.
