閥門電動執行器的原理介紹

閥門電動執行器的原理介紹
Introduction of the principle of valve electric actuator

一，結構介紹
1.structure introduction
什么是電動閥電動閥門？簡單地說就是用電動執行器控制閥門,從而實現閥門的開和關。其可分為上下兩部分，上半部分為電動執行器，下半部分為閥門。電動閥分兩種，一種為角行程電動閥：由角行程的電動執行器配合角行程的閥使用，實現閥門90度以內旋控制管道流體通斷；另一種為直行程電動閥：由直行程的電動執行器配合直行程的閥使用，實現閥板上下動作控制管道流體通斷。通常在自動化程度較高的設備上配套使用,本閥水平安裝調節精度.
What is electric valve? An electric valve is simply an electric actuator that controls valve and in this way can achieve valve's opening and closing. It can be divided into upper and lower parts. The upper part is the electric actuator and the lower part is the valve. There are two kinds of electric valves, one is angle stroke electric valve: it is used by its electric actuator and cooperates with the valve to realize the control of the fluid flow of the valve within 90 degrees; the other is direct stroke electric valve: it is used by its electric actuator and cooperates with the valve to realize the control of the fluid flow of the pipeline through the up and down motion of the valve plate. Usually when used in conjunction with a higher degree of automation equipment, horizontal installation can get the best adjustment accuracy.

二，原理
2．principle
電動閥門操作原理電動閥通常由電動執行機構和閥門連接起來，經過安裝調試后成為電動閥。電動閥使用電能作為動力來接通電動執行機構驅動閥門，實現閥門的開關、調節動作。從而達到對管道介質的開關或是調節目的。電磁閥是電動閥的一個種類；是利用電磁線圈產生的磁場來拉動閥芯，從而改變閥體的通斷，線圈斷電，閥芯就依靠彈簧的壓力退回。
The operating principle of electric valve. Electric valve is usually connected by electric actuator and valve, after installation and debugging, it becomes electric valve. The electric valve uses electric energy as a power to switch on the electric actuator driving valve to realize the valve switching and regulating action. In this way can achieve the opening and closing of pipeline medium and the regulating purpose. The solenoid valve is a kind of electric valve, it uses the magnetic field generated by the electromagnetic coil to pull the valve core, thus changing the valve body's on and off, so that the coil is cut off, and the valve core relies on the pressure of the spring to retreat.
三.用途
3．application
電動閥門的用途：電動閥：用于液體、氣體和風系統管道介質流量的模擬量調節，是AI控制。在大型閥門和風系統的控制中也可以用電動閥做兩位開關控制。電動閥：可以有AI反饋信號，可以由DO或AO控制，比較見于大管道和風閥等。
The application of the electric valve: electric valve: for analog adjustment of the pipeline medium flow of the liquid, gas and wind system, belongs to AI control. In the control of large valves and wind systems, electric valve can also be used for two-position switch control. Electric valve: It can have AI feedback signal, which can be controlled by DO or AO, usually be used in large pipes and dampers.  
Ⅰ.開關形式：電動閥的驅動一般是用電機，開或關動作完成需要一定的時間模擬量的，可以做調節。
Ⅰ. Switch form: the electric valve is usually driven by a motor. The opening or closing operation requires a certain amount of time for analog measurement, and can be adjusted.
Ⅱ.工作性質：電動閥門的驅動一般是用電機，比較耐電壓沖擊。電磁閥是快開和快關的，一般用在小流量和小壓力，要求開關頻率大的地方電動閥反之。電動閥閥的開度可以控制，狀態有開、關、半開半關，可以控制管道中介質的流量而電磁閥達不到這個要求。氣動閘閥：借助壓縮空氣驅動的閥門。
Ⅱ. The nature of the work: the electric valve is usually driven by a motor, more resistant to voltage shock. Solenoid valves are quick-opening and quick-closing. They are generally used in small flow and small pressure, where the switching frequency is large, and the electric valve is the opposite. The opening of the electric valve can be controlled, and the state can be opened, closed, half-opened and half-closed, which can control the medium flow in the pipeline and the solenoid valve cannot meet this requirement. Pneumatic gate valve: A valve driven by compressed air.