ATC

來源：伊羅朗流體控制（上海）有限公司 2018年01月17日 10:34

ATC REDUCES TEMPERATURE ERROR UP TO 90%

High-precision pressure measurement with PASCAL Ci4 and diaphragm seals: ATC technology reduces temperatur error up to 90% - Pressure transmitter PASCAL Ci4 with additional temperature sensor behind the diaphragm seal.

The new developed ATC technology reaches a quantum leap in the temperature stability of diaphragm seal systems. High-precision pressure measurements can thus be carried out together with the high accuracy of the LABOM pressure measuring device.

Diaphragm seals are frequently used in the process industry for pressure measurements to protect the measuring device against aggressive media or – for example in the pharmaceutical industry – to create a gap-free process connection. The process is separated from the measuring device by means of a thin metal diaphragm. A pressure transmission fluid behind the diaphragm transmits the process pressure to the actual pressure sensor. A solution can be found for almost any pressure measurement task using diaphragm seal systems.

A drawback is that the diaphragm seal is not compley non-reactive. The pressure transmission fluid expands as a result of the process heat and deflects the separating diaphragm. This generates a restoring force depending on the rigidity of the above mentioned diaphragm, which is received as an error in the pressure measurement.

LABOM has developed and implemented a further compensation process to create a solution for this problem. The temperature of the pressure transmission fluid is recorded with an additional temperature sensor (ATC technology (ATC = Active Temperature Compensation)). This sensor is positioned as close as possible to the separating diaphragm. The sensor thus records the temperature of the liquid behind this diaphragm with good accuracy.

Because of this additional temperature measurement the resulting errors can mathematically be corrected immediay. Studies have shown that errors can be reduced by 80-90% with small diaphragm seals in a stationary state. High-precision pressure measurements can thus be carried out directly benefitting from the high accuracy of the pressure measuring device.

相關產品

免責聲明

凡本網注明“來源：儀表網”的所有作品，均為浙江興旺寶明通網絡有限公司-儀表網合法擁有版權或有權使用的作品，未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的，應在授權范圍內使用，并注明“來源：儀表網”。違反上述聲明者，本網將追究其相關法律責任。
本網轉載并注明自其它來源（非儀表網）的作品，目的在于傳遞更多信息，并不代表本網贊同其觀點或和對其真實性負責，不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時，必須保留本網注明的作品第一來源，并自負版權等法律責任。
如涉及作品內容、版權等問題，請在作品發表之日起一周內與本網聯系，否則視為放棄相關權利。