8227系列壓力傳感器

• Features

  • 測量范圍介于0 ... 0.05 bar至0 ... 500 bar和-1 ... 1 bar至-1 ... 10 bar
  • 準確度0.25％
  • 輸出0 ... 10 V，可選0 ... 5 V或4 ... 20 mA
  • 適用于液體和氣體介質
  • 用于動態和靜態測量
  • 選項：測量
  • 非常經濟的價格

• Product data

  型號L	8227
  量程L	0 … 0.05 bar 0 … 0.1 bar 0 … 0.25 bar 0 … 0.5 bar 0 … 1 bar 0 … 2 bar 0 … 5 bar 0 … 10 bar 0 … 20 bar 0 … 50 bar 0 … 100 bar 0 … 200 bar 0 … 500 bar
  測量類型L	測量表壓 可選測量絕壓
  信號輸出L	0 … 5 V 0 … 10 V 4 … 20 mA
  工作溫度L	-40 ... +105 °C
  過載損壞L	＞200%額定量程
  特點L	測量范圍介于0 ... 0.05 bar至0 ... 500 bar和-1 ... 1 bar至-1 ... 10 bar 適用于液體和氣體介質 用于動態和靜態測量 選項：測量 非常經濟的價格

• Description

  This sensor is designed specifically for industrial use: industry-standard signal outputs and connectors, standard measurement ranges, rugged design and low cost. With its rugged housing, high-quality electrical connector and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals that can be transmitted over relatively long distances (current-signal output available as an option). For high viscose materials, a front-level membrane is available, ａnd with this disruptive dead volumes can be expelled.

  Areas of use:

  • Controlling and monitoring of production facilities
  • Cooling and air-conditioning systems
  • Hydraulic or pneumatic machinery
  • Monitoring of compressors and pumps
  • Manufacturing systems
  • Plastics processing industry

  The sensor element located inside the transducer comprises a diaphragm that measures the applied pressure with respect to the current atmospheric pressure (relative reading).

  For the front-level option, the measuring element is situated directly behind the very stable membrane manufactured from stainless steel. The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure.

  For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum.

  As an electrical connection, a DIN 43650A valve connector or an M12 x 1 connection is available. A process connection can be chosen from several alternatives. The built-in instrumentation amplifier outputs a voltage or current according to the pressure. The output is protected against short-circuit and polarity reversal of the supply voltage.

• Downloads

  Data sheet

  8227技術參數

  英

• LINKS & CAD DATA