8511系列拉壓力傳感器

高精度，安裝方便，簡單的力引入，用于拉伸和壓縮，用于靜態和動態測量，材料鋁和鋁。不銹鋼，防護等級IP 64

Features
- 量程范圍小，從 0 ... 5 N 到 0 ... 2kN
- 可測拉力和壓力
- 部分型號精度可達0.1%F.S.
- 材質鋁或不銹鋼
- 小巧的外形設計
- 安裝十分方便

Product data

型號	8511
量程范圍	0 … 5 N 0 … 10 N 0 … 20 N 0 … 50 N 0 … 100 N 0 … 200 N 0 … 500 N 0 … 1000 N 0 … 2000 N
受力方向	壓力和壓力
標準化信號	可選配
信號輸出	1 mV/V 1.5 mV/V 取決于量程范圍
保護等級	IP54
過載保護	No
拉盤	No
受力壓頭	No
使用溫度范圍	-30 ... +90 °C
具體特點	量程范圍小，從 0 ... 5 N 到 0 ... 2kN 可測拉力和壓力部分型號精度可達0.1%F.S. 材質鋁或不銹鋼小巧的外形設計安裝十分方便

Description

Model 8511 bending beam load cells are designed for measuring tension and compression forces. Their high accuracy, low torque sensitivity and very low mounting height make these sensors particularly suitable for use in weighing and dosing technology as well as for laboratory and production use.

Extremely simple force application makes the sensor easy to handle. It offers a very favorable price/performance ratio and can be used universally for static and dynamic measurements.

Examples of application:

    Dosing system
    Load deflection curve
    Tension force measurement for wire or thread winders
    Friction forces
    Cable force
    Withdrawal force, etc

The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by rubber bellows.

To install the load cell, it is securely clamped on the side with 2 bore holes. The tension or compression force to be measured is applied at the other end. Force is applied easily perpendicular to the sensor axis. This serves to prevent falsification of the measured values. The influence on the measuring signal resulting from the increase of load distance on the mounting side (e.g. by a touch finger) is negligible. Overload protection can be realized with little effort using a mechanical stop.
Downloads

Data sheet

8511參數資料
EN

Operation manual

8511使用手冊
EN