江蘇春晨電纜有限公司：http://www.caria-chile.com/st82365/
簡要說明:FDEF-25（-40） FDEF風能電纜（耐寒）耐扭曲軟電纜， 風力發電機電纜（風力發電電纜），除滿足普通電纜的性能外，還必須滿足彎曲半徑小、頻繁扭轉的基本要求，由于風力發電電纜多用在氣候條件較為惡劣的地區，一般多用在我國的北方地區，FDEF風能電纜氣候較寒冷，且晝夜溫差較大，因此風力發電電纜還必須滿足環境溫度-45℃～＋50℃，運行溫度為-40℃～＋50℃的使用條件。我公司自2005年初開始致力于風力發電機電纜技術的研究，參照德國DIN VDE的標準，對風力發電機電纜進行結構優化設計，并選用世界上*的絕緣及護套材料，電纜的性能達到了平。風力發電機電纜分為動力電纜、控制電纜電纜，
Brief description: FDEF-25 (-40) 450/750V copper core rubber insulated chloroprene rubber sheath for wind power generation (cold) twist resistant soft cable, special cable for wind turbine generator (wind power cable), in addition to meet the performance of ordinary cable, small bending radius, also must meet the basic requirements of frequent change, because of wind power cable in the climate condition is bad areas, commonly used in China's northern region, the climate was cold, and the larger diurnal temperature difference, so wind power cable must also meet the environmental temperature of -45 DEG C to 50 DEG C, operation temperature is -40 DEG C which use conditions. I started the company is committed to research wind turbine special cable technology since the beginning of 2005, according to the German DIN VDE standard, carries on the structure optimization design of special cable wind generator, and the insulation and sheath material world optimal, cable performance has reached the international advanced level. Special cable for wind power generator is divided into power cable, control cable and cable.
