TST簡要介紹橡膠行業國家標準（二）

TST簡要介紹橡膠行業國家標準（二）

101 GB/T 6038-1993 橡膠試驗膠料的配料、混煉和硫化設備及操作程序 Rubber test mixes--Preparation, mixing and vulcanization--Equipment and procedures
102 GB/T 6326-1994 輪胎術語 Tyre terms
103 GB/T 6327-1996 載重汽車輪胎強度試驗放方法 Strength test method for truck and bus tyres
104 GB/T 6757-1986 輸送帶貯存和搬運通則 Conveyor belts--Guide to storage and handling
105 GB/T 6759-1986 輸送帶的層間粘合強度測定方法 Conveyor belts--Determination of ply adhesion
106 GB/T 6760-1986 平帶的層間粘合強度測定方法 Flat belts--Determination of ply adhesion
107 GB/T 6761-1986 平帶全厚度拉伸強度和伸長率測定方法 Flat transmission belting--Test method of full thickness tensile strength and elongation
108 GB/T 7035-1993 輕型載重汽車輪胎高速性能試驗方法 轉鼓法 High speed performence test for light truck tyres Drum method
109 GB 7037-1992 翻新和修補輪胎（斜交） Retreading and repair of tyres （Diagonal）
110 GB/T 7044-1993 色素炭黑技術條件 Colour black-Specification
111 GB/T 7045-1993 色素炭黑pH值的測定 Colour black--Determination of pH value
112 GB/T 7046-1995 色素炭黑鄰苯二甲酸二丁酯吸收值的測定 Colour carbon black--Determination of dibutyl phthalate absorption number
113 GB/T 7047-1993 色素炭黑揮發分含量的測定 Colour black--Determination of volatile content
114 GB/T 7048-1993 色素炭黑黑度的測定 Colour black--Determination of blackness
115 GB/T 7050-1993 色素炭黑著色力的測定 Colour black--Determination of tinting strength
116 GB/T 7052-1995 色素炭黑流動度的測定 Colour carbon black--Determination of flow characteristic
117 GB 7127-1986 汽車液壓制動膠管 Rubber hose for automotive hydraulic brake system
118 GB 7128-1986 汽車氣壓制動膠管 Rubber hose for automotive air brake system
119 GB/T 7129-1986 汽車液壓制動膠管內容積膨脹測定方法 Determination of volumetric expansion of rubber hose for automotive hydraulic brake system
120 GB/T 7528-1987 橡膠軟管術語 Rubber hose--Glossary of terms
121 GB/T 7535-1996 硫化橡膠分類 分類系統說明 Rubber, vulcarized--Classification--Description of the classification system
122 GB 7542-1987 鐵路機車車輛制動用橡膠軟管 Rubber brake hoses for railway locomotive and car
123 GB 7543-1996 橡膠醫用手套 Rubber surgical gloves
124 GB/T 7755-1987 硫化橡膠透氣性的測定 恒容法 Rubber, vulcanized--Determination of permeability to gases--Constant volume method
125 GB/T 7756-1987 硫化橡膠透氣性的測定 恒壓法 Rubber, vulcanized--Determination of permeability to gases--Constant pressure method
126 GB/T 7757-1993 硫化橡膠或熱塑性橡膠壓縮應力應變性能的測定 Rubber,vulcanized or thermoplastic--Determination of compression stress-strain properties
127 GB/T 7758-1987 硫化橡膠低溫特性的測定 溫度回縮法 （TR試驗） Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure（TR test）
128 GB/T 7759-1996 硫化橡膠、熱塑性橡膠 常溫、高溫和低溫下壓縮*變形測定 Rubber, Vulcanized or thermoplastic Determination of compression set at ambient elevated or low temperatures
129 GB/T 7760-1987 硫化橡膠與金屬粘合的測定 單板法 Rubber, vlcanized--Determination of adhesion to metal--One-plate method
130 GB/T 7761-1987 橡膠與剛性材料粘合強度的測定 圓錐形件法 Rubber--Determination of adhesion to rigid materials using conical shaped parts
131 GB/T 7762-1987 硫化橡膠耐臭氧老化試驗 靜態拉伸試驗法 Rubber, vulcanized--Resistance to ozone ageing--Static strain test method
132 GB/T 7763-1987 硫化橡膠溶脹指數測定方法 Rubber, vulcanized--Determination method of swelling index
133 GB/T 7764-1987 橡膠鑒定 紅外分光光度法 Rubber--Identification--Infrared spectrometric method
134 GB/T 7765-1987 橡膠中銅含量的測定 二乙基二硫代氨基甲酸鋅光度法 Rubber--Determination of copper content--Zinc diethyldithiocar bamate photometric method
135 GB/T 7766-1987 硫化橡膠中炭黑含量的測定 硝酸消化法 Rubber, vulcanized--Determination of carbon black content--Nitric acid digestion method
136 GB/T 7767-1994 炭黑術語 Standard terminology relating to carbonblack
137 GB/T 7983-1987 輸送帶成槽性試驗方法 Conveyor belts--Troughability--Method of test
138 GB/T 7984-1987 普通用途織物芯輸送帶 Conveyor belts of duck construction for general use
139 GB/T 7985-1987 輸送帶帶芯抗撕裂性試驗方法 Conveyor belts--Carcass tear resistance--Method of test
140 GB/T 9571-1988 橡膠、塑料軟管靜態條件下耐臭氧性能的評定 Rubber and plastics hoses--Assessment of ozone resistance under static conditions
141 GB/T 9572-1988 橡膠塑料軟管和軟管組合件電阻的測定 Rubber and plastics hoses and hose assemblies--Determination of electrical resistance
142 GB/T 9573-1988 橡膠、塑料軟管和軟管組合件尺寸測量方法 Rubber and plastics hoses and hose assemblies--Methods of measurement of dimensions
143 GB/T 9574-1988 橡膠、塑料軟管和軟管組合件試驗壓力、爆破壓力與設計工作壓力的比率 Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure
144 GB/T 9575-1988 橡膠、塑料軟管內徑尺寸和長度公差 Rubber and plastics hoses--Bore diameters and tolerances on length
145 GB/T 9577-1988 橡膠、塑料軟管和軟管組合件標志、包裝和運輸規則 Rubber and plastics hoses and hose assemblies--Specification for mar king, package and transportation
146 GB/T 9578-1988 標準參比炭黑 Standard reference black
147 GB/T 9580-1988 標準參比炭黑的鑒定方法 Standard practice for carbon black--Evaluation of a standard reference black
148 GB 9745-1995 航空輪胎 Aircraft tyre
149 GB/T 9746-1995 航空輪胎系列 Series of aircraft tyres
150 GB/T 9747-1988 航空輪胎動力模擬試驗方法 Dynamometer test methods for aircraft tyres
151 GB/T 9766-1994 輪胎氣門嘴試驗方法 Test method for tyre valve
152 GB/T 9767-1994 輪胎氣門芯試驗方法 Test method for tyre valve core
153 GB/T 9768-1988 輪胎使用與保養規程 Regulation of application and maintenance of tyres
154 GB/T 9769-1988 輪輞輪廓檢測 Rim contour inspection
155 GB/T 9770-1988 鋼絲繩芯輸送帶 Steel cord conveyor belts
156 GB 9865-1988 硫化橡膠樣品和試樣的制備 Rubber, vulcanized--Preparation of samples and test pieces
157 GB/T 9865.1-1996 硫化橡膠或熱塑性橡膠樣品和試樣的制備 *部分: 物理試驗 Rubber, vulcanized or thermoplastic--Preparation of samples and test pieces--Part1: Physical tests
158 GB/T 9867-1988 硫化橡膠耐磨性能的測定 （旋轉輥筒式磨耗機法） Rubber--Determination of abrasion resistance using a rotating cylinderical drum device
159 GB/T 9868-1988 橡膠獲得高于或低于常溫試驗溫度通則 Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
160 GB/T 9870-1988 彈性體動態試驗的一般要求 Elastomers--General requirements for dynamic testing
161 GB/T 9871-1988 硫化橡膠老化性能的測定 （拉伸應力松弛試驗） Rubber,vulcanized--Determination of ageing characteristics by measurement of stress at a given elongation
162 GB/T 9873-1988 橡膠中鉛含量的測定 雙硫腙光度法 Rubber--Determination of lead content--Dithizone photometric method
163 GB/T 9874-1988 硫化橡膠中金屬含量的測定 火焰原子吸收光譜法 第三部分: 鉛含量的測定 Vulcanized rubber--Determination of metal content--Flame atomic absorption spectrometric method--Part 3: Determination of lead content
164 GB/T 9875-1988 硫化橡膠中聚合物的鑒定 化學方法 Vulcanized rubber--Identification of polymers--Chemical method
165 GB/T 9877.1-1988 旋轉軸唇形密封圈結構尺寸系列 *部分: 內包骨架旋轉軸唇形密封圈 Rotary shaft lip seals--Design criteria for standard applications--Part 1: rubber covered rotary shaft lip seals
166 GB/T 9877.2-1988 旋轉軸唇形密封圈結構尺寸系列 第二部分: 外露骨架旋轉軸唇形密封圈 Rotary shaft lip seals--Design criteria for standard applications--Part 2: Metal cased rotary shaft lip seals
167 GB/T 9877.3-1988 旋轉軸唇形密封圈結構尺寸系列 第三部分: 裝配式旋轉軸唇形密封圈 Rotary shaft lip seals--Design criteria for standard applications--Part 3: assembled rotary shaft lip seals
168 GB/T 9881-1988 橡膠與橡膠制品通用術語 Rubber and rubber products general-purpose terms
169 GB/T 9882-1988 再生橡膠術語及定義 Reclaimed rubber terms and definitions
170 GB/T 9885-1988 食品用及醫用橡膠制品術語 Terms of rubber products for foodstuff and medicine
171 GB/T 9887-1988 膠乳制品術語 Rubber latices products terms
172 GB/T 9900-1988 抽出式難燃橡膠導風筒 Extractable ventilation rubber ducting of the fire retardant
173 GB 10213-1995 一次性使用橡膠檢查手套 Singie-use rubber examination glove-Specification
174 GB/T 10541-1989 近海停泊排吸油橡膠軟管的分類、規格和基本技術要求 Classification, dimension and basic requirements for rubber hose—Oil suction and discharge—Offshore mooring
175 GB 10543-1989 飛機地面加油和泄油用橡膠軟管 Rubber hoses for aircraft ground fuelling and defuelling
176 GB/T 10544-1989 鋼絲纏繞增強外覆橡膠的液壓橡膠軟管和軟管組合件 Rubber hoses and hose assemblies—Rubber-covered,spiral wire reinforced, hydraulic type—Specification
177 GB 10546-1989 液化石油氣 （LPG） 橡膠軟管 Liquid petroleum gas rubber hose
178 GB/T 10652-1989 高聚物多孔彈性材料彈性的測定 Polymeric materials, cellular flexible—Determination of resilience
179 GB/T 10653-1989 高聚物多孔彈性材料壓縮*變形的測定 Polymeric materials, cellular flexible—Determination of compression set
180 GB/T 10654-1989 高聚物多孔彈性材料拉伸強度和扯斷伸長率的測定 Polymeric materials, cellular flexible—Determination of tensile strength and elongation at break
181 GB/T 10655-1989 高聚物多孔彈性材料空氣透氣率的測定 Polymeric materials, cellular flexible—Determination of air flow permeability
182 GB/T 10707-1989 橡膠燃燒性能測定 氧指數法 Rubber—Determination of flammability by oxygen index
183 GB/T 10708.1-1989 往復運動橡膠密封圈結構尺寸系列 *部分: 單向密封橡膠密封圈 Reciprocating rubber seals—Design criteria for standard applications—Part 1: Rubber seals of act on single seal
184 GB/T 10708.2-1989 往復運動橡膠密封圈結構尺寸系列 第二部分: 雙向密封橡膠密封圈 Reciprocating rubber seals—Design criteria for standard applications—Part 2: Rubber seals of act on doubls seal
185 GB/T 10708.3-1989 往復運動橡膠密封圈結構尺寸系列 第三部分: 橡膠防塵密封圈 Reciprocating rubber seals—Design criteria for standard applications—Part 3: rubber seals for wipers
186 GB/T 10714-1989 V 帶難燃性規范和試驗方法 V-belts—Specification of the fire-resistivity and the test method
187 GB/T 10715-1989 抗靜電環形V帶導電性規定值和試驗方法 Antistatic endless V-belts—Electrical conductivity —Characteristic and method of test
188 GB/T 10716-1989 同步帶拉伸性能試驗方法 Synchronous belt—Test method for tensile properties
189 GB/T 10717-1989 同步帶齒剪切強度試驗方法 Synchronous belt—Test method for tooth shearing strength
190 GB/T 10718-1989 同步帶包布剝離強度試驗方法 Synchronous belt—Test method for fabric stripping strength
191 GB/T 10719-1989 同步帶繩抽出強度試驗方法 Synchronous belt—Test method for cord pull-out strength
192 GB/T 10722-1989 炭黑比表面積的測定 氮吸附方法 Carbon black—Determination of specific surface area —Nitrogen adsorption method
193 GB/T 10723-1989 用ASTM標準參比炭黑改善炭黑試驗再現性的標準方法 Standard method for carbon black—Improving test reproducibility using ASTM reference blacks
194 GB/T 10821-1993 農業機械用V帶尺寸 V-belts for agricultural machinery-Dimensions
195 GB/T 10822-1989 一般用途難燃輸送帶 Frame retardant conveyor belts for general use
196 GB/T 10823-1996 充氣輪胎輪輞實心輪胎系列 Series of solid tyres for pneumatic tyres rims
197 GB/T 10824-1996 充氣輪胎輪輞實心輪胎 Solid tyres for pneumatic tyres rims
198 GB/T 11063-1989 聚酰胺片基平帶 Polyamide plate based flat belt
199 GB/T 11191-1989 航空輪胎爆破壓力試驗方法 Burst pressure test method for aircraft tyre
200 GB/T 11192-1989 航空輪胎靜負荷性能試驗方法 Test method of static loaded perfor mance for aircraft tyre

東莞特斯特檢測儀器，涉及到的領域有塑膠/橡膠、紙品包裝、油墨印刷、膠粘帶、箱包、皮革、環境、五金電子、玩具等眾多行業和領域。紙箱抗壓機，破裂強度機，恒溫恒濕箱，拉力試驗機，剝離強度試驗機，老化箱，鹽霧機，電子式拉力機，硫化儀，門尼粘度儀，橡膠輪胎試驗機，各種環境試驗機，材料試驗機，沖擊試驗機，疲勞試驗機，油墨脫色，單雙翼跌落機等。產品符合EN 、 DIN 、 BS 、UL、 ASTM 、 JIS 、 GB 、ISO …等標準。