型號描述
該傳感器 Cube 測量導電率。 該傳感器是為應用于在線分析系統（型號：8905）的流體 Backplane 上而設計的。 導電率給出了溶于水中的材料的濃度信息。測量值是恒定水質的指標，但若該測量值發生急劇的變化，同樣也說明水質變差。同樣地，測量值下降或者上升時也需加以重視，因為它是特殊處理步驟給出信息反饋的指標。導電率傳感器 Cube 含有一個雙電極工位。 須通過系統中的 Backplane 建立電氣和流體連接。該傳感器 Cube 通過 büS 與系統進行通信，借此在線分析系統可實現全自動化信息通報。 若將傳感器嵌入系統中，它將被列入 büS 參與者列表中，而且可以根據客戶要求作出進一步的調整。
1）兼容于 büS 系統和諸多其他的傳感器 Cube
2）純電阻雙電極工位
3）熱插拔功能允許在運行期間更換傳感器 Cube
4）測量水耗實現最小化
Type Description
The device is a conductivity measurement sensor. It is used within the Online Analysis System Type 8905 by being plugged into a spare fluidic backplane slot. The conductivity of water follows in general the content of dissolved substances in the water. Not only the absolute value at each moment is an indicator for the continuity of the water quality, but quick changes in the conductivity may indicate unwanted change in the water. A rising or falling value can also be used as an indicator for process feedback in specific treatment steps. The device contains a 2-electrode sensor for resistive measurement of conductivity. The electrical and fluidic connections are made via the connection panel of the system. The sensor cube is communicating via büS, so the recognition at the Online Analysis System is fully automatic. When plugging into a system you will find the sensor in the list of büS members for further customized adjustments.
1）Fully compatible with büS systems and a wide range
2）Resistive 2-electrode sensor
3）Modular sensor cube for hot swap (exchange during operation)
4）Minimal sample water flow needed
