土工合成材料水平滲透儀參數規格,土工合成材料水平滲透儀,土工布動態穿孔測定儀,土工合成材料耐靜水壓測定,土工合成材料抗?jié)B儀,土工合成材料滲透系數測定儀,微機控制土工合成材料拉拔儀
據技術部6月4日上午08點55分透露:(/c149978/products/d.html)
YI、TCGB-10型土工合成材料水平滲透儀概述:
TCGB-10型土工合成材料水平滲透儀根據GB/T17633、SL/T235、ISO/FDISI2958《土工織物及其相關產品沿織物平面輸水能力的測定土工布及其有關產品平面內水流量》的國家標準研發設計。適用于測定一定法向壓力作用下的土工織物在常水頭水流下的水平滲透系數和導水率,性能穩定,方便實用。
Overview of tcgb-10 horizontal permeability meter for geosynthetics:
Tcgb-10 horizontal permeability meter for geosynthetics is developed and designed according to the national standards of GB / t17633, SL / T235 and ISO / fdisi2958 "determination of water carrying capacity of Geotextiles and their related products along the plane of fabric" and "water flow in the plane of Geotextiles and its related products". It is suitable for measuring the horizontal permeability coefficient and hydraulic conductivity of geotextile under the action of certain normal pressure under constant head water flow. The performance is stable, convenient and practical.
二、TCGB-10型土工合成材料水平滲透儀主要特點:
彩色觸屏控制,壓力及時間直觀顯示,水位電動調整。
可擴展功能:流量的顯示,恒溫水源的控制(需定制)
The main features of tcgb-10 horizontal permeability meter for geosynthetics are as follows:
Color touch screen control, pressure and time visual display, water level electric adjustment.
Extensible function: flow display, constant temperature water source control (to be customized)
三、TCGB-10型土工合成材料水平滲透儀技術參數:
1、試樣尺寸:100x200mm
2、施加于試樣的法向壓力范圍:10-250kpa
3、水利梯度:0.1 、 1.0
4、外形尺寸:1100x600x1500mm
5、整機重量:150kg
四、TCGB-10型土工合成材料水平滲透儀操作步驟:
打開電源開關,點擊目錄輸入面積和時間
1、試驗用水應為脫氣水或蒸餾水。
2、分別裁剪順機向和橫機向試樣各3塊,當試樣較薄時應取2層或3層試樣重疊為一組進行試驗,這時應相應各剪裁6塊或9塊試樣。
3、將試樣包封在乳膠膜或橡皮套內,試樣應平整無褶皺,周邊應無滲漏,對于直接加荷型,應仔細安裝試樣上下墊層,使試樣承受均勻法向壓力。
4、施加2-5kpa的壓力,使試樣就位,隨即向水位容器內注入脫氣水,排走試樣內的氣泡,試驗過程中試樣應飽和。
5、按現場條件選用水力梯度,當情況不明時選用水力梯度不大于1.0.
6、按現場條件或設計要求選擇法向壓力至少進行三種壓力試驗,一種壓力稍大于設計值,一種稍低于設計值。對試樣施加小一法向壓力,持續15min。抬高容器的水位,使其達到要求的水力梯度。當水流穩定后,測讀通過500立方厘米滲透水量的時間,或記錄15min內通過的水量。每個水力梯度下平行測定3次。
7、換一種水力梯度重復以上步驟。
8、增大法向壓力,重復以上步驟對其余法向壓力下的試驗進行完畢。
五、標定:
輸入標定的數據點擊標定即可
六、試驗完畢清理表面,以備下次使用。
主營產品:土工檢測儀器,防水材料檢測儀器,陶瓷磚檢測
儀器,水利水電粗粒土系列,瀝青儀器檢測儀器
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy and hydropower coarse-grained soil series, asphalt testing instrument