100KN伺服拉力試驗機英文

H O S T S P E C I F I C A T I O N S

1.  High-accuracy American Transcell force sensor:matching within 100KN.the The force accuracy is within±5﹪.

2.  Capacity segmentation:seven shifts in the entire travel:× 1﹪,× 2﹪,× 5﹪,× 10﹪, × 20﹪, × 50﹪,and × 100﹪.The high-accuracy24bits A／D is adopted,and the samoling frequency is 200HZ.and Max.force resolutionin the entire travel is 1／1000,00.

3.  Power system:Japan Panasonic ACservo motor＋Panasonic ACdrive＋Germany Planetary reducer＋ball screw＋feed rod linear bearing＋synchronous belt drive.

4.  Control system:the Pulse Command control mode is adopted to make the control more accurate,with the speed control ]range of 0.001-200mm／min.The intermediate plate adjustment has functions of rapid rough adjustment and slow fine adjustment.After testing.automatically return to the original point and automatically save.

5.  Data transmission mode:RS232 transmission

6. Display mode:display in the screen of the computer with UTM107＋WIN-XP testing software.

7.The force linear double calibration system with the simpleone shift and the accurate seven shifts in the entire travel

8.The luxury testing interface software can realize the control modes of speed setting,displacement setting,load setting （can set holding time）,load incrase rate setting,stress increase rate setting,strain increase rate setting,etc,and together with the multi-level control mode,can meet various testing requirements.

9.Entire-travel displacement:the encoder is 2500 P／R,the LINE DRIVE encoder is adopted to increase 4times accuracy with extremely strong capacity of resisting disturbance,and the displacement resolution is 0.001mm.Small deformation:metal extensometer,and the resolution is 0.001mm（optional）.

10. Safety device:overload emergency shut-down device,up and down travel limiting device,electric leakage auto-power-off system,and automatic breakpoint halt function.

11.  Manual control mode:wireless remote control device or manual control case can be added.

I n t r o d u c t I o n   o f  s o f t w a r e  f u n c t I o n s

1.   Testing standard modularization function:to provide user-set necessary application testing and standard settings,and the range coversGB,ASTM,DIN,JIS,BS,etc,The testing standard specifications.

2.   Testing objects information:to provide all the user-set testing objects data,and one-time input the data for permanent repeatedueing,You can add or modify formula by yourself to raise the propriety of the testing data.

3.  Double reports edition:full open user-editing report for the testers to select the favorable report form（the testing program newly adds the internally built EXCEL report editing function toextend the form of the report,whichis formerly singular）

4.  Each length,force unit,display digit adopts dynamic exchanging mode,force unit T,KG N, KN gand lb,and deformation unit mm,cm and inch

5.   Automatic optimization of graphic curve scale（AutopiaScale）can make the graph dicsdisplay in optimal scale,and make the real-time graph dynamic switchinthetestwithloaddisplacement,load-time,stress-strain,load-2-point extension chart ,and multi-curve comparison.

6.  The testing results can be output in data in EXCEL form.

7.  After the testing,automatically and manually save the files,and calculatep Max.force,upand down yield strength,lagging ring method,step-by-step method,non-proportion strength pressive extension,elasticity modulus,extension rate,stripping interval Max.value,Min.value,average vakue,net energy,turn-back energy,total energy,bending modulus,breakpoint displacement x﹪ load,breakpoint load x﹪ displacement,etc.Data backup:the testing data can be saved in required hard disc partition.

8.  Multiple languages can be randomly switched:simplified Chinese,traditional Chinese,and English.

9.  The software has the function of the history testing data demonstration.

 A T T a C H M E N T S

1.  One-year quality guarantee and Chinese operating instruction

2.  One group of standard tension jigs given with the machine （other jigs to bepurchased）

3.  One piece of testing software specialized for the tensile machine

4.  One brand computer and one color printer

          Experimental Jiangdu days Hui Machinery Co., Ltd. :0514 -8,678,861,2   86,788,613    :0514 -86,588,229