• <del id="qqie6"><sup id="qqie6"></sup></del>
  • <tfoot id="qqie6"></tfoot>
  • <ul id="qqie6"></ul>
  • 您好, 歡迎來到儀表網

    | 注冊| 產品展廳| 收藏該商鋪

    13911237038

    technology

    首頁   >>   技術文章   >>   試驗機術語

    北京普桑達儀器科技有限公...

    立即詢價

    您提交后,專屬客服將第一時間為您服務

    試驗機術語

    閱讀:2718      發布時間:2009-12-14
    分享:

    試驗機術語

    點擊次數:169 發布時間:2009-8-27 14:19:07

    1 擺錘沖擊刀刃 pendulum striking edge
    2 擺錘沖擊速度 impact velocity of the pendulum
    3 擺錘空擊 free swing of pendulum
    4 擺錘力矩 moment of pendulum
    5 擺錘式?jīng)_擊試驗機 pendulum impact testing machine
    6 擺動周期 swing period
    7 擺桿 rod of pendulum
    8 擺軸 axle of rotation
    9 半自動試驗機 semi-automatic testing machine
    10 杯突試驗機 cupping testing machine
    11 變形速率 rate of deformation
    12 標稱值 nominal value
    13 標度盤(尺) dial(scale)
    14 標度盤幾何中心 geometric centre of the dial
    15 標距 gauge length
    16 標準測力儀 standard dynamometer
    17 標準扭矩儀 standard torquemeter
    18 標準硬度機 standard hardness tester
    19 表面洛氏硬度計 Rockwell superficial hardness tester
    20 表面洛氏硬度值 Rockwell superficial hardness number
    21 布氏硬度計 Brinell hardness tester
    22 布氏硬度壓頭 Brinell hardness indenter
    23 布氏硬度值 Brinell hardness number
    24 材料工藝性能 material processibility
    25 材料試驗機 material testing machine
    26 測力系統 dynamometric system
    27 測量 measurement
    28 測量重復性 repeatability of measurement
    29 測量再(復)現性 reproducibility of measurement
    30 測量范圍 measuring range
    31 [測量范圍]上限值 [measuring range] higher limit
    32 [測量范圍]下限值 [measuring range] lower limit
    33 超聲硬度計 ultrasonic hardness tester
    34 超試驗力 over test force
    35 程序控制試驗機 program-controlled testing machine
    36 持久強度 creep rupture strength
    37 持久強度試驗機 creep rupture strength testing machine
    38 沖擊擺錘 impact pendulum
    39 沖擊錘體 impact hammer
    40 沖擊韌性 impact toughness
    41 沖擊試驗機 impact testing machine
    42 沖擊試驗支座 impact specimen support
    43 沖擊試樣支座跨距 span of impact specimen supports
    44 沖擊能量 impact energy
    45 從動針 follow-up pointer
    46 初試驗力 initial test force
    47 傳感器 transducer
    48 錘式布氏硬度計 hammering type Brinell hardness tester
    49 打擊點 striking point
    50 打擊中心 center of strike
    51 低頻疲勞試驗機 low frequency fatigue testing machine
    52 低溫試驗機 low temperature testing machine
    53 低溫裝置 low temperature device
    54 顛簸實驗 bump test
    55 點漂 point drift
    56 電液伺服疲勞試驗機 electro-hydraulic servo-controlled fatigue testing machine
    57 電子式試驗機 electronic testing machine
    58 動靜試驗機 static/dynamic universal testing machine
    59 動蠕變 dynamic creep
    60 動態[試驗]力 dynamic [test] force
    61 斷后標距 final gauge length
    62 斷后伸長率 percentage elongation after fracture
    63 斷裂韌性 fracture toughness
    64 斷面收縮率 percentage reduction of area
    65 斷面增大率 percentage increase of area
    66 多次沖擊試驗機 repeated impact testing machine
    67 反向器 reverser
    68 非金屬材料試驗機 non-metallic material testing machine
    69 分度值 division value
    70 復合試驗機 combined test force testing machine
    71 腐蝕試驗機 corrosion testing machine
    72 高頻疲勞試驗機 high frequency fatigue testing machine
    73 高溫試驗機 high temperature testing machine
    74 高溫裝置 high temperature device
    75 隔熱屏 radial beat shield
    76 工程應力 engineering stress
    77 工藝性能試驗 processibility test
    78 規定殘余伸長應力 permanent set stress
    79 規定非比例伸長(壓縮)應力 proof stress of non-proportional elongation(compression)
    80 規定總伸長(壓縮)應力 proof stress of total elongation(compression)
    81 橫梁 cross-beam
    82 橫應變 transverse strain
    83 緩沖器 buffer
    84 機械式試驗機 mechanical testing machine
    85 記錄裝置 recorder
    86 加熱元件 heating element
    87 夾頭 grip
    88 剪切強度 shear strength
    89 剪切應力 shear stress
    90 金屬材料試驗機 metallic material testing machine
    91 [靜]蠕變 [static]creep
    92 靜態[試驗]力 static [test] force
    93 徑向間隙 radial clearance
    94 均熱帶長度 uniform temperature zone length
    95 空試驗力 no test force
    96 拉桿 pull rod
    97 拉力試驗機 tensile testing machine
    98 拉伸強度 tensile strength
    99 [試驗]力 [test] force
    100 力標準機 force standard machine
    101 力傳感器 force transducer
    102 力基準機 primary force standard machine
    103 力學性能 mechanical properties
    104 力學性能試驗 mechanical test
    105 量程 measuring span
    106 靈敏度 sensitivity
    107 洛氏硬度值 Rockwell hardness number
    108 洛氏硬度計 Rockwell hardness tester
    109 洛氏硬度壓頭 Rockwell hardness indenter
    110 落錘式?jīng)_擊試驗機 falling impact testing machine
    111 滿量程誤差 full scale error
    112 磨損 abrasion
    113 摩擦磨損試驗機 friction-abrasion testing machine
    114 內力 internal force
    115 能量損失 energy loss
    116 粘彈性 viscoelasticity
    117 扭矩標準機 standard torquer
    118 扭矩基準機 primary standard torquer
    119 扭應變 torsional strain
    120 扭應力 torsional stress
    121 扭轉試驗機 torsion testing machine
    122 努氏硬度壓頭 Knoop hardness indenter
    123 努氏硬度值 Knoop hardness number
    124 撓度 deflection
    125 疲勞 fatigue
    126 疲勞斷裂 fatigue fracture
    127 疲勞極限 fatigue limit
    128 疲勞試驗機 fatigue testing machine
    129 疲勞壽命 fatigue life
    130 漂移 drift
    131 平均試驗力 mean test force
    132 平均應變 mean strain
    133 平均應力 mean stress
    134 平面應變斷裂韌度 plane-strain fracture toughness
    135 鉗口 jaw
    136 強度 strength
    137 切應變 shear strain
    138 屈服點 yield point
    139 蠕變強度 creep strength
    140 蠕變?cè)囼?yàn)機 creep testing machine
    141 蠕變速度 rate of creep
    142 熱疲勞試驗機 thermal fatigue testing machine
    143 上屈服點 upper yield point
    144 邵氏硬度計 Shore durometer
    145 邵氏硬度值 Shore durometer number
    146 始點漂移 zero drift
    147 示波沖擊試驗機 impact testing machine with the scope
    148 示值 indicating value
    149 示值重復性誤差 repeatability error in the indicating value
    150 示值重復性相對誤差 relative error of repeatability in the indicating value
    151 示值進回程誤差 error between forward and backward in indicating value
    152 示值進回程相對誤差 relative error between forward and backward in indicating value
    153 示值誤差 indicating value
    154 示值相對誤差 relative error of indicating value
    155 試件 sample
    156 試臺 testing bench
    157 試驗機附件 accessories of testing machine
    158 試驗空間 test space
    159 [試驗]力 [test] force
    160 試驗力保持時間 duration of test force
    161 試驗力范圍 range of test force
    162 試驗力幅 test force amplitude
    163 試驗力施加速度 rate of applying test force
    164 試驗力施加系統 system of applying test force
    165 試驗系統的柔度 testing system flexibility
    166 試樣 specimen
    167 松弛 relaxation
    168 松弛試驗機 relaxation testing machine
    169 松弛應力 relaxation stress
    170 塑性 plasticity
    171 塑性變形 plastic deformation
    172 算術平均值 arithmetic mean
    173 縮短率 percentage reduction of length
    174 彈簧試驗機 spring testing machine
    175 彈性 elasticity
    176 彈性變形 elastic deformation
    177 彈性模量 modulus of elasticity
    178 彈性滯后 elastic hysteresis
    179 條件疲勞極限 conditional fatigue limit
    180 同軸度 coaxiality
    181 彎曲強度 bending strength
    182 彎折試驗機 reverse bend tester
    183 試驗機 universal testing machine
    184 溫度波動 variation in testing temperature
    185 溫度范圍 temperature range
    186 溫度控制器 temperature control equipment
    187 溫度梯度 temperature gradient
    188 維氏硬度計 Vickers hardness tester
    189 維氏硬度壓頭 Vickers hardness indenter
    190 維氏硬度值 Vickers hardness number
    191 位移傳感器 displacement transducer
    192 下屈服點 lower yield point
    193 線材扭轉試驗機 wire torsion tester
    194 線性應變 linear strain
    195 肖氏硬度計 Shore hardness tester
    196 肖氏硬度壓頭 Shore hardness indenter
    197 肖氏硬度值 Shore hardness number
    198 攜帶式硬度計 portable hardness tester
    199 循環[試驗]力 cyclic [test]force
    200 循環應變 cyclic strain
    201 循環應力 cyclic stress
    202 壓板 compression plate
    203 壓力試驗機 compression testing machine
    204 壓縮強度 compressive strength
    205 壓頭主軸 main axle of indenter
    206 引伸計 extensometer
    207 引伸計標距 extensometer gauge length
    208 應變 strain
    209 應變范圍 range of strain
    210 應變幅 strain amplitude
    211 應力 stress
    212 應力比 stress ratio
    213 應力范圍 range of stress
    214 應力幅 stress amplitude
    215 應力強度因子 stress intensity factor
    216 應力—應變圖 stress-strain diagram
    217 硬度 hardness
    218 硬度計 hardness tester
    219 硬度壓頭 hardness indenter
    220 液壓式試驗機 hydraulic testing machine
    221 原始標距 original gauge length
    222 約定真值 conventional true value
    223 運輸包裝件試驗機 transport packages testing machine
    224 趙氏硬度計 Pusey and Jones indentation instrument
    225 趙氏硬度值 Pusey and Jones indentation hardness number
    226 真應力 true stress
    227 真值 true value
    228 正應力 normal stress
    229 指示裝置 indicating device
    230 指針 pointer
    231 軸向間隙 axial clearance
    232 軸應變 axial strain
    233 zui大[試驗]力 maximum [test]force
    234 zui大循環[試驗]力 maximum cyclic [test]force
    235 zui大循環應力 maximum cyclic stress
    236 zui大應變 maximum strain
    237 zui小[試驗]力 minimum [test] force
    238 zui小循環[試驗]力 minimum cyclic [test] force
    239 zui小循環應力 minimum cyclic stress
    240 zui小應變 minimum strain
    241 準確度 accuracy
    242 準確度等級 accuracy class
    243 自動試驗機 automatic testing machine
    244 總試驗力 total test force

     

    會員登錄

    請輸入賬號

    請輸入密碼

    =

    請輸驗證碼

    收藏該商鋪

    標簽:
    保存成功

    (空格分隔,最多3個,單個標簽最多10個字符)

    常用:

    提示

    您的留言已提交成功!我們將在第一時間回復您~
    在線留言
    主站蜘蛛池模板: 国产成人综合久久亚洲精品| 欧美成人午夜精品免费福利| 五月天国产成人AV免费观看| 亚洲成人福利在线观看| 亚洲av成人片在线观看| 色综合天天综合网国产成人| 欧洲成人午夜精品无码区久久| 国产成人精品无码播放| 亚洲国产成人精品无码一区二区 | 999影院成人在线影院| 成人午夜视频网站| 亚洲国产成人久久综合区| 欧美成人性色生活片| 国产成人精品福利网站在线观看| 亚洲av成人综合网| 国产成人涩涩涩视频在线观看| 亚洲国产成人久久一区www| 噜噜噜亚洲色成人网站| 成人免费无码大片A毛片抽搐色欲 成人免费无码大片a毛片 | 免费的成人a视频在线观看| 精品无码成人久久久久久| 亚洲高清成人欧美动作片| 国产成人综合久久综合| 成人欧美一区二区三区视频| 亚洲国产成人久久一区久久| 成人免费公开视频| 成人欧美一区二区三区视频| 1204国产成人精品视频| 国产精品成人va在线观看入口| 成人免费在线视频| 久久亚洲最大成人网4438| 国产成人精品实拍在线| 成人午夜小视频| 成人深夜视频在线观看| 最新69堂国产成人精品视频| 成人a在线观看| 成人深夜福利在线播放不卡| 欧美国产成人精品一区二区三区| 亚洲AV无码成人专区| a级成人毛片免费视频高清| 麻豆国产成人AV在线|