INDX 900 NDT
X-Ray-Filmprocessor
Technical Specifications
Processing applications: All type of Industrial X-Ray films
Film thickness: min. 0,10 mm
Materialwidth: min. 6 cm (2.36") - max. 36 cm (14")
Material length: min. 10 cm (4")
Time in Developer: min.30 sec max. 150 sec
Intake Speed: 38 cm/min 8 cm/min
Cycle Time: 2,7 min (162 sec) 13,6 min (816 sec)
(see the table on one of the next page)
INDX 900
Tank capacity - Developer: 2,6 L
Fixer: 2,5 L
Wash water: 3 L
Solution heating(Fix and DEV): variable in a range of 18°C - 43°C
(350W Inline Heater)
Dryer: warm air
Replenishment: fully automatic.
replenishment is microprocessor controlled and
calculated from information received from sensors
measuring the width and length of material entering the
processor. Replenishment cycles are variable.
power supply: 1 / N / PE~ 230V (+6% / -10%), 50Hz, 13A, 1.7KW
(alternatives are avaliable on request)
water supply: 2-way magnetic valve, with 3/4" hose connection by using a
DVGW-approved system-separating device or pipe-separating
device.
Wash water flow rate: 1,5 ltr/min when film is in process
Wash water supply pressure: 3 - 10 bar
Wash water supply: filtered at a temperature of 10°C - 15°C
INDX 900
Weight: Empty 58 kg
With solution 66 kg
