LDC輸出,Digital顯示多功能電度表:Algodue UPT210
UPT210參數:
輸出電壓: 50V
相數: 單相
工作溫度: -15°C to +60°C
產品尺寸:106x90x57 mm
產地: 意大利
Algodue UPT210 應用領域 Applications:
1. 配電板、發電機組、電機控制中心
2. 可替代家用,工業以及商用用機電儀表
3. 電力監控和控制系統
4. 個人機負載檢測
5. 電容器銀行操作監督
6. 遠程計量和成本配置
UPT210是可編程多功能變換器,可測量三相系統的電能消耗和主要電氣參數。(UPT210 is a programmable multi-function transducer able to measure the energy consumption and the main electrical parameters on three-phase systems.)
由于應用了真有效值方法,可對畸變波形進行精確測量 (Thanks to the True RMS method, it provides accurate measurements even by distorted waveform.)
可通過光敏耦合輸出傳輸zui多兩個電能值。 (Up to two energies can be re-emitted on the optoisolated outputs.)
通過可選串行通信口,可在PC機或PLC上讀取和記錄三相系統的主要電氣參數 (Via the optional serial communication port the main three phase parameters can be read and logged on a PC or a PLC.)
WINTOOL 軟件可使UPT210連接到PC機,以檢查被測量值和對儀器編程。(software allows to connect UPT210 to a PC, to check the measured values and to program the device.)
UPT210可替代多種模擬表(指針表),如單一功能的電壓表,電流表,有功功率表,無功功率表,頻率表,功率因數表,電能表(電度表)。 (UPT210 replaces multipleanalog tranducers as well as single function devices such asvoltmeters, ammeters, wattmeters, varmeters, frequency-meters,powerfactor-meters, energy-meters, etc.)
可通過某些選項定制基本儀器,以適合特定應用。 (The basic instrument can be customized with some options to fit the specific application.)
UPT210是一種緊湊型,費效比高的多功能變送器,適于能源監測和管理網絡。 (UPT210 is a compact, cost effective multi-function transducer suitable for energy monitoring and management network.)
產品外觀:
訂購信息:
Algodue UPT210 LCD顯示多功能電鍍表/電能表
型號: UPT210
Algodue Code: AURAUCA5XAX2XX2
更多UPT210電鍍表 Algodue咨詢,歡迎隨時來電垂詢,謝謝!