8512系列S型拉壓力傳感器
高精度，非常扁平的設計，簡單的力施加，用于拉伸和壓縮，許多負載循環，用于靜態和動態測量，防護等級IP 64
-
Features
- 量程范圍小，從 0 ... 20N 到 0 ... 880N
- 可測拉力和壓力
- 精度 0.1%F.S.
- 出色的性價比
- 小巧的外形設計
- 安裝十分方便
-
Product data
型號 8512 量程范圍
0 … ±20 N
0 … ±50 N
0 … ±100 N
0 … ±220 N
0 … ±440 N
0 … ±880 N受力方向 壓力和壓力 標準化信號 No 信號輸出 2 mV/V 3 mV/V 取決于量程范圍 保護等級 IP54 過載保護 可選配 拉盤 No 受力壓頭 No 使用溫度范圍 -40 ... +80 °C 具體特點 - 量程范圍小，從 0 ... 20N 到 0 ... 880N
- 可測拉力和壓力
- 精度 0.1%F.S.
- 出色的性價比
- 小巧的外形設計
- 安裝十分方便
-
Description
Model 8512 bending beam load cells are designed for measuring tension and compression forces. Their high accuracy, low torque sensitivity and thanks to the very flat design make these sensors particularly suitable for use in weighing and dosing technology as well as for laboratory and production use.
Extremely simple force application makes the sensor easy to handle. It offers a very favorable price/performance ratio and can be used universally for static and dynamic measurements.
Examples of application:
- Dosing system
- Automated tool testing
- Tension force measurement for wire or thread winders
- Test and analysis systems in the pharma industry
- Withdrawal force
- Measuring loads in cable systems
The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by metal cover including sealing material.
The tensile or compressive load to be measured is applied to the sensor element through the M6 threaded hole located on each end face. The load can be applied easily, along the sensor axis. This serves to prevent falsification of the measured values. Overload protection can be realized with little effort using a mechanical stop.
-
Downloads
Data sheet
8512參數資料 EN
Related products
8431,8432系列
