南非SABS電纜+南非認證電線+SANS CABLE

SANS 97
Electric cables - Impregnated paper-insulated metal-sheathed cables for rated voltages 3,3/3,3 kV to 19/33 kV (excluding pressure assisted cables)

電纜-額定電壓3,3/3,3 kV to 19/33 kV浸漬紙絕緣金屬護套電纜（不含壓力輔助電纜）

2

SANS 8434-2
Methods of test for assessment of the fire integrity of electric cables Part 2: Test for unprotected small cables for use in emergency circuits with a 930 ?C flame and with water spray

電纜耐火完整性評估的測試方法 第2部分 用930℃火焰和水噴霧對用于應急電路的無保護小電纜的測試

3

VC 8077
Safety of medium-voltage electric cables

中壓電纜的安全

4

VC 8075
Compulsory specification for the safety of electric cables with extruded solid dielectric insulation for fixed installations (300/500 V to 1 900/3 300 V)

固定敷設用擠包固體電介質絕緣電纜安全的強制規范 (300/500 V to 1 900/3 300 V)

5

SANS 7846
Electric cables - Thermosetting insulated armoured fire-resistant cables of rated voltage 600/1000 V, having low emission of smoke and corrosive gases when affected by fire - Specification

電纜-額定電壓600/1000 V熱固性絕緣鎧裝耐火電纜（受火影響時低煙及低腐蝕性氣體排放）-規范

6

SANS 7629-1
Electric cables - Specification for 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire Part 1: Multicore and multipair cables

電纜-300/500 V耐火屏蔽電纜（受火影響時低煙及低腐蝕性氣體排放）規范第1部分- 多芯和多對絞電纜

7

SANS 6286
Test methods for sheathing of insulated electric cables

絕緣護套電纜的測試方法

8

SANS 6284-5
Test methods for cross-linked polyethylene (XLPE) insulated electric cables Part 5: Ageing tests

交聯聚乙烯絕緣電纜測試方法 第5部分 老化測試