裝在紡織印染等流水線上計錄產品長度和米數的通用計數器. 經久耐用，企業的配件。
參數：
*大讀數：99999.9米或99999英尺11英寸
誤差：小于0.4%
回零：手柄回零
安裝：底板三孔安裝
輪徑：106毫米（公制）或97毫米 （英制）
| JM316系列滾動式計數器是根據需要設計而成，是用于長度和各種機械傳動的計錄器，一般用于長度和各種機械傳動的計錄器，一般用于紡織、印染、塑料薄膜、人造皮革等放量長度的記錄。 本器為六位數，轉軸旋轉方向可順、逆轉動，順轉為遞加、逆轉為遞減，*高計錄為：1-99999.9。當計數器**位數字顯示1，記錄長度為1碼，滾動轉3圈，依次類推，逢10進位。傳動比為1：3，*高計數速度：360轉/分。 本器裝有復零機構，如記錄到一定數量后，可按下復零按鈕，數字全部復零，然后作**階段記錄。 本器跳號靈活，計數正確，號碼顯示清晰，工作環境溫度在-15度——+55度，仍能保持正常計數 |
Meter Counter JM316 & JY316
Owner’s Manual
Features
These counters are best suited for recording length of textiles, cables , paper and leathers, etc. They are usually set with machines for use.. Their lightweight design eases to be set on the machine and reduce costs. They are capable of counting to 100,000 meters or 100,000 yards depending on the model chosen. The large bright counter enhances visibility. They are widely used for manufacturers of long length materials or products.
Specifications
Figures 6 figures, 6.5mm
Wheel Size Diameter of 106.1mm(JM316)
Diameter of 97mm (JY316)
Weight 0.5kg
Reset Push Knob
Capacity 0-99999.9 m (JM316)
0-99999.9Yd (JY316)
Max Speed 360r.pm
Temperature -15℃---+55℃
Dimension 172.5mm×64.5mm×45.7mm
3—φ4mm, 98.5mm×15.75mm
Precision 0.04%
Using your counter
1. Set the wheels on the steel axle, tighten the screws on the wheel.
2. Install the counter on machine with 3—φ4mm.
3. Keep the wheels pressing on the surface of the object which you want to measure . Make sure the wheels will follow the object to move.
4. Press the Knob to reset.
5. Start the machine. Measurement is beginning.
6. Stop the machine. Make sure the wheels stopped. Read the figures on the counter. That’s what you wanted.
