Cat泵經過驗證的設計與上等的組件確保長期的效能。CAT全系列潤滑油1.特制的同軸、高密度、拋光處理、實心陶瓷柱塞，耐磨且延長水封壽命。2.CATPUMP一家精心研制的高壓水封，提供的效能與水封壽命。3.99%濕式活塞杯/水封設計，讓液體冷卻且潤滑在兩側的橡膠材料，延長使用壽命。4.高強度不銹鋼柱塞桿，有一個360度支撐的十字頭，具備不易改變的柱塞桿對心準度。 CAT PUMPS OIL Establishing a regular crankcase oil change schedule is one of the most important steps in preventative maintenance and to assure long pump life. Check for oil in the crankcase before starting your pump. Running your pump without oil will VOID Periodically inspect to assure the oil level is at the red dot or midpoint on the gauge.Remove the oil cap on the top of the crankcase and inspect for water or other contaminants in the oil.Change immediately, if discolored or contaminated.Change initial fill after 50 hours running period.
Change oil every 3 months or at 500 hour intervals thereafter.Pumps using wicks should be periodically lubricated through the access holes on the top front of the crankcase.See Tech Bulletin 024 on lubrication of the Lo-Pressure seals.Larger pumps often use oilers.Oilers should be filled at start-up and opened for a minimum of thirty minutes prior to start-up.Adjust drip rate after start-up according to operating cycle of pump.(Approximately 2-3 drops per hole per week for typical installation.) See Tech Bulletin 024.
