Brief Description
The R&S®FPL1000 spectrum analyzer makes measuring fast and simple. The intuitive touchscreen is straightforward and easy to use. With its solid RF performance, light weight and small footprint, the R&S®FPL1000 combines the functionality of a benchtop instrument with the portability of a handheld instrument.
In an RF lab, the R&S®FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.
Key Facts
- Frequency range 5 kHz to 3 GHz
- SSB phase noise: –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier)
- DANL with preamplifier: –167 dBm from 10 MHz to 2 GHz
- Lightweight with small footprint
- Battery or 12/24 V DC operation (option)
- Use with power sensors (option)
- 40 MHz analysis bandwidth (option)
- Analog and digital signal analysis (option)
Features & Benefits
- One instrument for multiple applications
- Spectrum analysis
- Signal analysis
- Power measurements with power sensors
- Solid RF performance
- Low spurious responses
- Low displayed average noise level (DANL)
- Signal analysis bandwidth 40 MHz
- Low level measurement uncertainty
- Precise spectral measurements due to low phase noise
- Intuitive user interface
- High-resolution display
- Multipoint touchscreen
- Flexible arrangement of results and MultiView
- Toolbar
- Quiet operation
- Fully portable
- Battery pack and 12/24 V power supply
- Carrying bag and shoulder harness
- Low power consumption
Specifications
| FPL1000 Specifications | ||
| Frequency | ||
| Frequency range | 5 kHz to 3 GHz | |
| Aging per year | 1 × 10–6 | |
| with R&S®FPL1-B4 option | 1 × 10–7 | |
| Frequency resolution | 0.01 Hz | |
| Bandwidth | ||
| Resolution bandwidth (–3 dB) | sweep filters | 100 kHz to 10 MHz in 1/2/3/5 sequence |
| FFT filters | 1 Hz to 50 kHz in 1/2/3/5 sequence | |
| I/Q demodulation bandwidth | 10 MHz | |
| with R&S®FPL1-B40 option | 40 MHz | |
| Displayed average noise level (DANL) | ||
| RF preamplifier off | 5 MHz ≤ f < 2 GHz | –152 dBm (typ.) |
| RF preamplifier on (option R&S®FPL1-B22) | 10 MHz ≤ f < 2 GHz | –167 dBm (typ.) |
| Intermodulation | ||
| 1 dB compression of input mixer | +7 dBm (nom.) | |
| third-order intercept point (TOI) 300 MHz ≤ fin < 3 GHz | +20 dBm (typ.) | |
| Phase noise | f = 1 GHz, 10 kHz frequency offset | –108 dBc (1 Hz) (typ.) |
| Total measurement uncertainty | 1 MHz ≤ f < 3 GHz | 0.5 dB |
