公司下設三個部門（1.無損檢測部，其主營產品有：硬度計、測厚儀、粗糙度儀、探傷儀等2.水質分析部，其主要產品有：PH/ORP計，電導率儀，溶氧儀，濁度儀，懸浮物濃度計，COD，氨氮，總磷，離子濃度計，電磁濃度計等。3.電子電力部：熱像儀，兆歐表，電力分析儀，電纜接地故障測試儀，電纜高阻故障定位儀等等。），主要應用于電力、石油化工、環保、冶金、食品、醫療、造紙、水利、輕工、紡織、機械制造、科研等各行業、各自動化控制測量領域。
憑借公司的強大實力和經驗豐富的專業技術隊伍, 洪富公司享有直接的國外品牌的產品代理權:德國EPK，美國DEFELSKO，德國儀力信，美國GE;中國臺灣上泰，德國WTW，德國LOVIBOND等。
公司始終奉行“以客為尊，以人為本”的經營理念，以“產品精益求精，服務專業專注”為發展目標。我們愿以誠信合作、*創新的精神不斷為廣大客戶提供較早的產品和服務，為自動化控制事業的發展做出應有的貢獻。

點擊展示更多內容

奧林巴斯相控陣探頭相控陣探頭【奧林巴斯Olympus】我們制造用于不同檢測應用的各種形狀和尺寸的相控陣探頭

奧林巴斯相控陣探頭-奧林巴斯相控陣探頭產品詳情

奧林巴斯相控陣探頭

相控陣探頭【奧林巴斯Olympus】
我們制造用于不同檢測應用的各種形狀和尺寸的相控陣探頭。這里用示意圖說明了幾種類型的探頭

典型陣列探頭的頻率范圍為1 MHz到17 MHz，晶片的數量范圍為10到128。Olympus提供各種各樣利用壓電復合材料技術的探頭，可進行各種各樣的檢測。本部分說明Olympus的標準相控陣探頭。這些探頭被分為三種類型：角度聲束探頭、整合楔塊探頭及水浸探頭。
其它類型的探頭是根據應用需要而特殊設計的探頭。

整合式楔塊和符合規范的探頭

這種組合件將一體化楔塊和符合規范的探頭放置于同一個外殼中，這樣就使探頭和楔塊的組合件具有非常薄的側面，可以用于接觸式角度聲束檢測。由于無需在探頭和楔塊接觸面之間使用耦合劑，因此探頭和楔塊之間的耦合狀態會永遠保持的狀態。這些探頭可對應力腐蝕裂紋進行手動檢測，還可用于符合AWS和DGS規范的應用，此外，這些探頭還可同時使用40°到70°角度對6.35毫米到19毫米的較厚表面進行手動焊縫檢測（對接接頭、角接接頭、T型接頭）。

Advantages

Probe and wedge in the same housing
The lowest-profile probe-and-wedge combination for contact angle beam inspection
Coupling always good between probe and wedge interfaces, no need for couplant between the probe and wedge
Very small assembly for easy access in restricted areas
Inspections of 30° to 70° in steel, SW or LW
Easy to handle
Probes with an internal wedge can be specially ordered to fit a specific curvature radius.

Typical Applications

Manual weld inspection of 6.35 mm to 19 mm (0.25 in. to 0.75 in.) thick surfaces (butt joints, corner joints, tee joints), using 40° to 70° simultaneously
Manual inspection of stress-corrosion cracking
AWS and DGS code compliant applications

Probe Specifications and Dimensions

Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	Nominal Refracted Beam Angle in Steel	Integrated Wedge	External Dimensions mm (in.)
Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	Nominal Refracted Beam Angle in Steel	Integrated Wedge	L	W	H
2L8-DGS1	U8330598	2.0	8	1.0	8.0	9.0	58° SW	Yes	27 (1.06)	17 (0.67)	22 (0.87)
4L16-DGS1	U8330597	4.0	16	0.5	8.0	9.0	58° SW	Yes	27 (1.06)	17 (0.67)	22 (0.87)
2.25L16-45SW1	U8330014	2.25	16	0.75	12.0	12.0	45° SW	Yes	30 (1.18)	15 (0.59)	31 (1.22)
2.25L16-45LW1	U8330495	2.25	16	0.75	12.0	12.0	45° LW	Yes	30 (1.18)	15 (0.59)	31 (1.22)
5L16-45SW1	U8330496	5.0	16	0.60	9.6	10.0	45° SW	Yes	30 (1.18)	15 (0.59)	31 (1.22)
5L16-45LW1	U8330497	5.0	16	0.60	9.6	10.0	45° LW	Yes	30 (1.18)	15 (0.59)	31 (1.22)
2.25L16-AWS1	U8330660	2.25	16	1.0	16.0	16.0	N/A	No	25 (0.98)	38 (1.50)	18 (0.71)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths

深穿透型探頭

深穿透探頭可與各種楔塊配合使用，進行各種角度聲束的檢測應用。這些探頭專用于深穿透應用，如對較厚平板、焊縫、鍛件，及多噪聲或晶粒狀材料的檢測。

Advantages

Wave layers with acoustic adaptation to Rexolite®
Captive anchoring screws are provided with the probe.
A wide selection of wedges is available to suit any angle beam application.

Typical applications

A3, A4, and A5 probes
Deep penetration applications

Thick plates and welds
Forging
Noisy or granular material

Probe specifications and dimensions

Part number	Frequency (MHz)	Number of elements	Pitch (mm)	Active Aperture (mm)	Elevation(mm)	External dimensions mm (in.)
Part number	Frequency (MHz)	Number of elements	Pitch (mm)	Active Aperture (mm)	Elevation(mm)	L	W	H
3.5L16-A3	3.5	16	1.60	25.6	16.0	36 (1.41)	36 (1.41)	25 (0.98)
5L16-A3	5.0	16	1.20	19.2	12.0	36 (1.41)	36 (1.41)	25 (0.98)
1.5L16-A4	1.5	16	2.80	44.8	26.0	57 (2.25)	46 (1.80)	30 (1.19)
2.25L16-A4	2.25	16	2.00	32.0	20.0	57 (2.25)	46 (1.80)	30 (1.19)
2.25L32-A5	2.25	32	0.75	24.0	24.0	29 (1.15)	43 (1.67)	24 (0.96)
5L32-A5	5.0	32	0.60	19.2	20.0	29 (1.15)	43 (1.67)	24 (0.96)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.

焊縫檢測探頭

焊縫檢測探頭的外殼側面很薄且線纜從前面伸出的特點可以避免受到掃查器探頭架的干擾。這些探頭不僅適用于對厚焊縫進行的手動和自動檢測，還適用于對鑄鐵、鍛件、管道、管件、***加工部件和結構部件中的裂縫和焊接缺陷的檢測。

Advantages

Low-profile housing
Front-exit cable to avoid interference with the scanner probe holder
Fits special PipeWIZARD® wedges designed for automated inspections of girth welds (sophisticated irrigation channels, locking carbide wear pins)
Can be ordered with CE-certified Hypertronics connector
Suitable for manual and automated inspections
Available laterally focused probes improve defect length sizing (7.5CCEV100-60-A16)

Typical applications

Automated inspection of girth welds with PipeWIZARD systems
Manual or automated inspection of thick welds
Detection of flaws and sizing
Inspection of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects

Probe specifications and dimensions

Part number	Frequency (MHz)	Number of elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	External Dimensions mm (in.)
Part number	Frequency (MHz)	Number of elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	L	W	H
5L60-PWZ1	5.0	60	1.0	60.0	10.0	68 (2.68)	26 (1.02)	30 (1.18)
7.5L60-PWZ1	7.5	60	1.0	60.0	10.0	68 (2.68)	26 (1.02)	30 (1.18)
7.5L60-PWZ1*	7.5	60	1.0	60.0	10.0	68 (2.68)	26 (1.02)	30 (1.18)
5L48-PWZ2	5.0	48	1.0	48.0	10.0	56 (2.20)	26 (1.02)	30 (1.18)
5L32-PWZ3	5.0	32	1.0	32.0	10.0	40 (1.57)	26 (1.02)	30 (1.18)
7.5L32-PWZ3	7.5	32	1.0	32.0	10.0	40 (1.57)	26 (1.02)	30 (1.18)
10L32-PWZ3	10.0	32	1.0	32.0	10.0	40 (1.57)	26 (1.02)	30 (1.18)
7.5CCEV100-60-A16	7.5	60	1.0	60.0	18.0	68 (2.68)	29 (1.14)	30 (1.18)
7.5CCEV100-60-A16**	7.5	60	1.0	60.0	18.0	68 (2.68)	29 (1.14)	30 (1.18)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.

近壁探頭

近壁探頭的兩端具有較短的盲區（*晶片的中心和*后晶片的中心到與它們*近的探頭外殼邊緣的距離是1.5毫米）。它們可以地適用于復合材料的通道檢測，并用于復合材料的C掃描檢測（分層、脫膠和多孔性）。

Advantages

Shortened dead zone at both ends (1.5 mm between center of first or last element and housing edge)
Well suited for composite channel inspections
Used for C-scan inspections of composites (delamination, disbonding, and porosity)

Probe Specifications and Dimensions

Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	External Dimensions mm (in.)
Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	L	W	H
3.5L64-NW1	U8330148	3.5	64	1.0	64.0	7.0	66 (2.60)	19 (0.75)	25 (0.98)
5L64-NW1	U8330134	5.0	64	1.0	64.0	7.0	66 (2.60)	19 (0.75)	25 (0.98)
3.5L24-NW2	U8330965	3.5	24	1.0	24.0	7.0	26 (1.02)	19 (0.75)	30 (1.18)
5L24-NW2	U8330155	5.0	24	1.0	24.0	7.0	26 (1.02)	19 (0.75)	30 (1.18)
3.5L128-NW3	U8330695	3.5	128	1.0	128.0	7.0	130 (5.12)	21 (0.83)	35 (1.38)
5L128-NW3	U8330647	5.0	128	1.0	128.0	7.0	130 (5.12)	21 (0.83)	35 (1.38)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.

通用型探頭

用途廣泛的各種探頭與楔塊組合在一起的側面極薄，可以較為容易地進到空間狹小的區域。這些探頭可以和多種楔塊一起使用，進行各種角度聲束檢測應用。這些探頭不僅用于對6.35毫米到38毫米的較厚焊縫進行手動或自動檢測，還可對鑄鐵、鍛件、管道、管件、***加工部件及結構部件的裂縫和焊縫缺陷進行檢測。

Probe Specifications and Dimensions

Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	External Dimensions mm (in.)
Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	L	W	H
5L16-A10	U8330595	5.0	16	0.60	9.6	10.0	23 (0.91)	16 (0.63)	20 (0.79)
10L32-A10	U8330251	10.0	32	0.31	9.9	7.0	23 (0.91)	16 (0.63)	20 (0.79)
5L32-A11	U8330274	5.0	32	0.60	19.2	10.0	25 (0.98)	23 (0.91)	20 (0.79)
5L64-A12	U8330593	5.0	64	0.60	38.4	10.0	45 (1.77)	23 (0.91)	20 (0.79)
5L60-A14	U8330785	5.0	60	1.0	60.0	10.0	68 (2.68)	23 (0.91)	20 (0.79)
7.5L60-A14	U8330804	7.5	60	1.0	60.0	10.0	68 (2.68)	23 (0.91)	20 (0.79

線性陣列探頭是工業應用中*常用的相控陣探頭。定義相控陣探頭的一個重要因素是探頭的激活孔徑。

小腳印探頭

小腳印探頭可進入到活動空間狹窄的區域（A00探頭的腳印尺寸為8×8毫米）。

Advantages

Access to confined areas (A00 probe has an 8 × 8 mm footprint)
Cable connector can come out from either the side or the top
(A0 only).
Special-design small-footprint wedge
10L16-A00 is used for aerospace scribe-mark applications.

Probe Specifications and Dimensions

Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	External Dimensions mm (in.)
Part Number	Item Number	Frequency (MHz)	Number of Elements	Pitch (mm)	Active Aperture (mm)	Elevation (mm)	L	W	H
5L10-A0-SIDE	U8330080	5.0	10	0.60	6.0	6.0	13 (0.51)	10 (0.39)	23 (0.91)
5L10-A0-TOP	U8330075	5.0	10	0.60	6.0	6.0	13 (0.51)	10 (0.39)	23 (0.91)
10L10-A0-SIDE	U8330110	10.0	10	0.60	6.0	6.0	13 (0.51)	10 (0.39)	23 (0.91)
10L10-A0-TOP	U8330111	10.0	10	0.60	6.0	6.0	13 (0.51)	10 (0.39)	23 (0.91)
7.5CCEV35-A15	U8330826	7.5	16	0.50	8.0	10.0	26 (1.02)	22 (0.87)	9.7 (0.38】

關鍵詞：標準

熱門產品

產品名稱	參考價	地區	公司名稱	更新時間
X射線探傷機	面議	北京市	北京西潤斯儀器儀表有限公司	2024-05-05	在線詢價
X射線探傷機/探傷機	面議	北京市	北京亞歐德鵬科技有限公司	2018-03-28	在線詢價
X射線探傷機XXG-3005/L	面議	福州市	廈門欣銳儀器儀表有限公司	2025-07-28	在線詢價
出租租賃便攜式X射線探傷機	面議	北京市	北京北信創展自動化技術有限公司	2017-11-04	在線詢價
理學便攜式工業X射線探傷機/工業X射線探傷機	面議	北京市	北京亞歐德鵬科技有限公司	2016-11-08	在線詢價
X射線探傷機XXQ-3005/L	面議	福州市	廈門欣銳儀器儀表有限公司	2025-07-28	在線詢價

免責申明

所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，儀表網對此不承擔任何責任。儀表網不涉及用戶間因交易而產生的法律關系及法律糾紛，糾紛由您自行協商解決

友情提醒：本網站僅作為用戶尋找交易對象，就貨物和服務的交易進行協商，以及獲取各類與貿易相關的服務信息的平臺。為避免產生購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。過低的價格、夸張的描述、私人銀行賬戶等都有可能是虛假信息，請采購商謹慎對待，謹防欺詐，對于任何付款行為請您慎重抉擇！如您遇到欺詐等不誠信行為，請您立即與儀表網聯系，如查證屬實，儀表網會對該企業商鋪做注銷處理，但儀表網不對您因此造成的損失承擔責任！

相關產品分類更多+