產品詳情 Production Description：
• In low pressure compressed air（75psi）as the power to control the operation of the cylinder through the super pressure fluid valve body off, there are normally open and normally closed in two forms.
以低壓壓縮空氣（75psi）為動力推動氣缸來控制閥體內超高壓流體的通斷，有常開和常閉兩種形式。
• According to the valve port location. There are 6 kinds of forms, to meet a variety of connection.
按閥體連接端口位置形式共有6種，滿足了各種連接需要。
• The maximum working pressure can reach 60,000psi（4140Bar）.
工作壓力可達到60,000psi（4140Bar）。
• Can provide with position sensing products:HI type, convenient remote control.
可提供帶開關位置感應的產品：HI型，方便遠程控制。
• At ambient temperature range:-25℃~65℃（-13℉~149℉）.
環境溫度范圍：-25℃~65℃（-13℉~149℉）。
• Working medium: oil, gas, water.
工作介質：氣體、油品、水。
• The valve body material by 316 and the valve seal valve needle hard with using 17-4PH or hard alloy, wearresistance, long service life, to meet a variety of conditions.
閥體采用316材料，與之閥口配合硬密封閥針采用17-4PH或硬質合金，耐磨損，壽命長，滿足各種工況。
左圖：常閉氣控閥 右圖：常開氣控閥
Remark: If you need other working medium or high/low pressure product, please do not hesitete to contact us, our technical will send you the perfect proposal base on your request.
注：如需要其它溫度、介質的產品，請聯系我們，由我們專業的技術人員精心設計，滿足您的要求。
型號說明 Model Description：
常閉（NC）選型及尺寸 NC Type and size：
常開（NO）選型及尺寸 NO Type and size：
