瀝青混合料動態疲勞試驗機利用電液伺服驅動和控制技術、傳感器技術、電子技術、計算機處理技術，采用全中文界面編制的軟件系統開發的動態性能試驗設備，可進行瀝青混合料間接拉伸（劈裂）疲勞試驗、小梁疲勞試驗。
Asphalt mixture dynamic fatigue testing machine uses electro-hydraulic servo drive and control technology, sensor technology, electronic technology, computer processing technology, and a dynamic performance test equipment developed using a software system written in a Chinese interface. Split) fatigue test, trabecular fatigue test.
瀝青混合料動態疲勞試驗機技術參數：
★動載出力：0kN～20kN
★靜載出力：0kN～25kN
★頻率范圍：0Hz～10Hz
★數采系統采集速度：AHz
★壓力傳感器：量程0kN～25kN，精度0.1%F.S。
★主機尺寸580x600x1850mm
★伺服油源功率：7.5kW
★尺寸（H×D×W）：（400x700x810）mm
★環境箱：-30℃～20℃
★環境溫度： ≤30℃。
★相對濕度： ≤85%。
★整機功耗： 4KW。
★儀器凈重： 600kg
★電源電壓：380v 三相四線
Technical parameters of asphalt fatigue dynamic testing machine:
★ Dynamic load output: 0kN ～ 20kN
★ Static load output: 0kN ～ 25kN
★ Frequency range: 0Hz ～ 10Hz
★ Data acquisition system acquisition speed: AHz
★ Pressure sensor: range 0kN ～ 25kN, accuracy 0.1% F.S.
★ Host size 580x600x1850mm
★ Servo oil source power: 7.5kW
★ Size (H × D × W): (400x700x810) mm
★ Environment box: -30 ℃ ～ 20 ℃
★ Ambient temperature: ≤30 ℃.
★ Relative humidity: ≤85%.
★ Power consumption: 4KW.
★ Net weight of the instrument: 600kg
★ Power supply voltage: 380v three-phase four-wire
瀝青混合料動態疲勞試驗機主要結構組成：
由加載主機（含伺服油源）、夾具、傳感器及數采儀、微機及打印機（含數據處理軟件），并可依據要求配環境箱（可達-40℃）。
The main structural components of the asphalt mixture dynamic fatigue tester:
Load the host (including servo oil source), fixtures, sensors and data acquisition instruments, microcomputers and printers (including data processing software), and can be equipped with environmental boxes (up to -40 ℃) according to requirements.
