觸摸屏粘度計主要特點：
① 采用ARM技術，內置Linux系統。操作介面簡潔明了，通過測試程序的創建和數據分析，快速而方便地進行粘度測試；
② 粘度測值準確：每個量程都用計算機自動校準，精度高，誤差小；
③ 顯示內容豐富：除了粘度（動力粘度和運動粘度）外，還有溫度、剪切速率、剪切應力，測量值占滿量程值百分比（圖形顯示）、量程溢出報警、自動掃描、當前轉子轉速組合下的粘度測量范圍、日期、時間等。并可在已知密度的情況下顯示運動粘度，滿足用戶的不同測量要求；
④ 功能齊全：可定時測量、自建30組測試程序、存取30組測量數據、實時顯示粘度曲線、打印數據和曲線等；
⑤ 前置水平儀：水平調節直觀方便；
⑥ 無級調速： RV1T系列: 0.3-100轉，共有998種轉速
RV2T系列： 0.1-200轉，共有200種轉速
⑦顯示剪切速率對粘度的曲線：在計算機上實時顯示，也可顯示時間或溫度對粘度的曲線
⑧ 可選配Pt100的溫度探頭：測溫范圍寬，從-20到300℃，測溫精度0.1℃；
⑨ 可選配件豐富：粘度計專用恒溫浴槽、恒溫杯、打印機、標準粘度樣品（標準硅油）等；
⑩ 中英文操作系統。
DV1T/DV2T系列無級調速觸屏旋轉粘度計可測量的范圍非常大，從10 mPa.S 到 32000萬mPa.S，幾乎涵蓋了大部分的樣品。使用R系列的圓盤轉子，和美國博力飛的同類型粘度計一樣，可替代使用。
廣泛應用于油漆、涂料、化妝品、油墨、紙漿、食品、油品、淀粉、膠黏劑、乳膠、生化制品等等行業。
I. Main characteristics of touch screen viscometer:
① Adopt ARM technology and built-in Linux system. The operation interface is simple and clear. Through the creation of test programs and data analysis, the viscosity test can be performed quickly and easily;
② Accurate viscosity measurement: each range is automatically calibrated by computer, with high accuracy and small error;
③ Rich display content: In addition to viscosity (dynamic viscosity and kinematic viscosity), there are temperature, shear rate, shear stress, measured value as a percentage of full scale value (graphic display), range overflow alarm, automatic scanning, current rotor speed Combined viscosity measurement range, date, time, etc. It can display kinematic viscosity under the condition of known density to meet different measurement requirements of users;
④ Complete functions: it can measure time, build 30 test programs, access 30 sets of measurement data, display viscosity curve, print data and curve in real time;
⑤ Front level meter: level adjustment is intuitive and convenient;
⑥ Stepless speed regulation: RV1T series: 0.3-100 rpm, a total of 998 speeds
RV2T series: 0.1-200 rpm, with a total of 200 speeds
⑦Show the curve of shear rate vs. viscosity: real-time display on the computer, and also the curve of time or temperature vs. viscosity
⑧ Optional Pt100 temperature probe: wide temperature measurement range, from -20 to 300 ℃, temperature measurement accuracy of 0.1 ℃;
豐富 Abundant optional accessories: constant temperature bath for viscometer, constant temperature cup, printer, standard viscosity sample (standard silicone oil), etc .;
⑩ Chinese and English operating system.
The DV1T / DV2T series stepless speed-adjustable touch screen rotary viscometer can measure a very large range, from 10 mPa.S to 320 million mPa.S, covering most of the samples. The R series disk rotor is the same as the same type of viscometer from Bolivia in the United States, which can be used instead.
Widely used in paint, coating, cosmetics, ink, pulp, food, oil, starch, adhesive, latex, biochemical products and other industries.
觸摸屏粘度計技術參數:
★控制/顯示方式：5 英寸彩色觸摸屏
★轉速（r/min）：0.3-100無級變速，共有97個轉速可選
★測量范圍mPa.s
RVDV-1T：100 -1300萬
HADV-1T：200-2600萬
HBDV-1T：800-10400萬
★轉子：R2 – R7（6個，標配）
R1（選配）（測量低于下限的粘度，需選配R1轉子）
★樣品用量：500ml
★測量誤差：±1% （牛頓液體）
★重復誤差：±0.5% （牛頓液體）
★顯示剪切應/剪切速率：標配
★定時功能：標配
★實時顯示：粘度曲線、剪切速率-粘度 曲線、溫度-粘度 曲線、時間-粘度 曲線
★運動粘度：需輸入樣品的密度
★溫度測量功能：標配溫度探頭接口（需要選配溫度探頭）
★自動掃描功能：自動掃描并推薦轉子與轉速的優先組合
★測量范圍：自動顯示所選擇的轉子與轉速的組合可測量的粘度范圍
★自建測量程序：可保存30組（包括轉子、轉速、溫度、時間等）
★保存測量結果：可保存30組數據（含粘度、溫度、轉子、轉速、剪切速率、剪切應力、時間、密度、運動粘度等）
★打印：數據、曲線可打印（標配有打印接口，需選購打印機）
★數據輸出接口：RS232
★恒溫部件：選件（含各種粘度計專用恒溫槽、恒溫杯、）
★工作電源：寬電壓工作（110V / 60Hz 或 220V / 50Hz）
★外形尺寸：300 × 300 × 450（mm）
Touch screen viscometer technical parameters:
★ Control / display mode: 5 inch color touch screen
★ Speed (r / min): 0.3-100 stepless speed change, 97 speeds are available
★ Measuring range mPa.s
RVDV-1T: 1-13 million
HADV-1T: 2-26 million
HBDV-1T: 8-10 million
★ Rotor: R2-R7 (6, standard)
R1 (optional) (to measure viscosity below the lower limit, R1 rotor is required)
★ Sample dosage: 500ml
★ Measurement error: ± 1% (Newton liquid)
★ Repeat error: ± 0.5% (Newton liquid)
★ Shear response / shear rate: standard
★ Timer function: standard
★ Real-time display: viscosity curve, shear rate-viscosity curve, temperature-viscosity curve, time-viscosity curve
★ Kinematic viscosity: Need to input the density of the sample
★ Temperature measurement function: Standard temperature probe interface (requires optional temperature probe)
★ Automatic scanning function: Automatically scan and recommend the priority combination of rotor and speed
★ Measuring range: Automatically display the measurable viscosity range of the selected rotor and speed combination
★ Self-built measurement program: 30 groups can be saved (including rotor, speed, temperature, time, etc.)
★ Save measurement results: 30 sets of data (including viscosity, temperature, rotor, speed, shear rate, shear stress, time, density, kinematic viscosity, etc.)
★ Printing: Data and curve can be printed (standard with print interface, need to purchase printer)
★ Data output interface: RS232
★ Constant temperature parts: optional (including various constant temperature tanks, constant temperature cups, etc.)
★ Working power: wide voltage operation (110V / 60Hz or 220V / 50Hz)
★ Dimensions: 300 × 300 × 450 (mm)
