功能
- 繼電器輸出(Hi, Low)
- 4 繼電器
- 峰值和采樣保持
- 模擬輸出 (DAC)
- Watch dog
- 脈沖/圈輸入校準
選項
- OP-02 : RS232C 串行接口
- OP-03 : RS485 多式界面
規格
| 規格 | 參數值 |
|---|---|
| 檢測方法 | Hall element |
| 測量范圍 | 1?~20?(using a 60P/R gear, 1~20,000r/min, with an output waveform duty cycle 50%±20%) |
| 檢測齒輪 | Strong magnetic materials |
| 檢測器與齒輪的間隙 | (modulus 0.5~3, tooth width 3 mm or greater) |
| 電源 | DC 12V±2V(0.5Vp-p or less ripple) |
| 電流消耗 | 40mA or less(12V, at 25℃) |
| 輸出波形 | Lew level;±0.5V rectangular waveform(With no loac) |
| 輸出阻抗 | Approx. 330Ω |
| 輸出類型 | Floating groung |
| 保護電路 | Power supply polarity and output short protection |
| 使用溫度范圍 | -10℃~+70℃ |
| 貯存溫度范圍 | -20℃~+80℃ |
| 匹配連接器 | 6-pin connector(type R04-PB6F plug) |
| 允許震動 | double-ended 1.2mm at 30? in X, Y and Z direction |
| (操作中) | for one hour each |
| 允許沖擊(無操作) | 490m/s2 in X and Y direction each 3 times |
| 耐壓 | 1. DC250V, 1min.(between shield and signal cable) 2. DC250V, 1min.(between shield and sensor head |
| 連接儀表 | DN-30 |
| 重量 | Approx. 80g(including two mounting nuts) |
| 配件 | Mounting nuts(2) |
尺寸
