小量樣品適配器由圓柱形的樣品室和轉子構成，可以在一定剪切率下進行測量。它可以用于Brookfield所有的標準粘度計和流變儀。
拆裝式樣品杯
小量樣品適配器的設計可以很容易就能更換樣品杯，而不影響粘度計和恒溫水浴的使用。這意味著在一定條件下，可以進行一系列樣品的連續測量。
溫度控制
樣品杯外套有水浴夾套，所以通過Brookfield恒溫水浴外部循環接口，可以很準確地進行恒溫。轉子的攪拌動作，加上樣品量很少，能夠將樣品溫度的不均勻性減少到zui低。如果選購帶溫度探頭的小量樣品適配器，使用在DV-I+、DV-II+PRO和DV-III_ULTRA儀器上，可以直接在一起顯示屏上顯示樣品的溫度值，溫度控制的范圍在-15℃-100℃。
圓柱形計和結構
小量樣品適配器的圓柱形計和結構能夠提供很準確的粘度測量，并且可以進行準確的剪切率條件下測量。
一次性樣品杯
對于很難清潔的樣品，我們可以提供一次性使用的鋁質樣品杯，它的尺寸與特制的水浴夾套SSA-DCU的尺寸配合
儀器組成：
水浴夾套
安裝托架
一個由客戶選定的SC4轉子
一個由客戶選定的SC4樣品杯
隔熱蓋
帶連接頭的延長鉤
包裝箱
SA小量樣品適配器粘度測量范圍 cP(mPa•s) | |||||
MODEL | Spindle:SC4-18 | Spindle:SC4-31 | Spindle:SC4-34 | Spindle:SC4-16 | Spindle:SC4-25Z(316 s/s only) |
Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-8R(P) | Sample Chamber:* SC4-13R(P) | |
Sample Volume:6.7ml | Sample Volume:9.0ml | Sample Volume:9.4ml | Sample Volume:4.2ml | Sample Volume:16.1ml | |
Shear Rate (sec-1):1.32N | Shear Rate (sec-1):.34N | Shear Rate (sec-1):.28N | Shear Rate (sec-1):.29N | Shear Rate (sec-1):2.2N | |
DV3TLV | 1.2-30K | 12-300K | 24-600K | 48-1.2M | 192-4.8M |
DV2TLV | 1.5-30K | 15-300K | 30-600K | 60-1.2M | 240-4.8M |
DV1MLV | 3-10K | 30-100K | 60-200K | 120-400K | 800-1.6M |
LVT | 5-10K | 50-100K | 100-200K | 200-400K | 800-1.6M |
DV3TRV |
|
|
|
|
|
DV2TRV |
|
|
|
|
|
DV1MRV |
|
|
|
|
|
RVT |
| However, it is possible to use the above |
| ||
DV3THA |
| spindles with any of these instruments. |
| ||
DV2THA |
| Digital Viscometers/Rheometers will |
| ||
DV1MHA |
| automatically calculate viscosity. Please |
| ||
HAT |
| you require information on viscosity range. |
| ||
DV3THB |
|
|
|
|
|
DV2THB |
|
|
|
|
|
DV1MHB |
|
|
|
|
|
HBT |
|
|
|
|
|
SSA小量樣品適配器粘度測量范圍 cP(mPa•s) | ||||||
MODEL | Spindle:SC4-21 | Spindle:SC4-27(D) | Spindle:SC4-15 | Spindle:SC4-28 | Spindle:SC4-29 | Spindle:SC4-14 |
Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-7R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-13R(P) | Sample Chamber:* SC4-6R(P) | |
Sample Volume:7.1ml | Sample Volume:10.4ml | Sample Volume:3.8ml | Sample Volume:11.0ml | Sample Volume:13.5ml | Sample Volume:2.1ml | |
Shear Rate (sec-1):.93N | Shear Rate (sec-1):.34N | Shear Rate (sec-1):.48N | Shear Rate (sec-1):.28N | Shear Rate (sec-1):.25N | Shear Rate (sec-1):.40N | |
DV3TLV | Not applicable for historical reasons. However, it is possible | |||||
DV2TLV | to use the above spindles with any of these instruments. | |||||
DV1MLV | Digital Viscometers/Rheometers will automatically calculate | |||||
LVT | if you require information on viscosity range. | |||||
DV3TRV | 20-500K | 100-2.5M | 200-5M | 200-5M | 400-10M | 500-12.5M |
DV2TRV | 25-500K | 125-2.5M | 250-5M | 250-5M | 500-10M | 625-12.5M |
DV1MRV | 50-170K | 250-830K | 500-1.7M | 500-1.7M | 1K-3.3M | 1.25K-4.2M |
RVT | 50-100K | 250-500K | 500-1M | 500-1M | 1K-2M | 1.25K-2.5M |
DV3THA | 40-1M | 200-5M | 400-10M | 400-10M | 800-20M | 1K-25M |
DV2THA | 50-1M | 250-5M | 500-10M | 500-10M | 1K-20M | 1.25K-25M |
DV1MHA | 100-300K | 500-1.7M | 1K-3.3M | 1K-3.3M | 2K-6.7M | 2.5K-8.3M |
HAT | 100-200K | 500-1M | 1K-2M | 1K-2M | 2K-4M | 2.5K-5M |
DV3THB | 160-4M | 800-20M | 1.6K-40M | 1.6K-40M | 3.2K-80M | 4K-100M |
DV2THB | 200-4M | 1K-20M | 2K-40M | 2K-40M | 4K-80M | 5K-100M |
DV1MHB | 400-1.3M | 2K-6.7M | 4K-13.3M | 4K-13.3M | 8K-26.7M | 10K-33.3M |
HBT | 400-800K | 2K-4M | 4K-8M | 4K-8M | 8K-16M | 10K-20M |
M = 1 million | K = 1 thousand N = RPM e.g. Spindle SC4-18 1.32 x 10 (rpm) = 13.2 sec-1 | cP = Centipoise mPa•s = Millipascal•seconds | ||||
N/A = Not applicable for historical reasons. However, it is possible to use any spindle/chamber combination with any torque range. Digital viscometers/rheometers will automatically calculate viscosity. | ||||||
* Examples | ||||||
SC4-13R Sample Chamber | SC4-13RP Sample Chamber with RTD temperature probe | |||||
SC4-13RPY Sample Chamber with RTD temperature probe and cable to viscometer/rheometer | ||||||
SC4-13RD-100 Disposable Sample Chamber available in packages of 100 | ||||||
SC4-27 Stainless Steel Spindle | SC4-27D Disposable Spindle | |||||
† Disposable chamber available in 13R size and requires SC4-45YD water jacket | ||||||
Note: Hasloy C available for some spindles/chambers - call for details | ||||||
