德國奧萊斯OLES進口不銹鋼刀形閘閥
【進口不銹鋼刀形閘閥】特點：
本閥門為雙閘板單面密封設計，有效防止閥腔內因*積灰而造成的閥門開關不到位、卡瑟等現象。閥體采用精密鑄鋼件，密封填料采用耐磨耐高溫氟橡膠密封組件，閥板與閥座間密封面采用耐磨硬質合金材料或耐磨增韌結構陶瓷，表面光滑，硬度可達60~70HRC，解決了密封面因物料沖刷而易被沖蝕、壽命不高的問題，使用壽命比普通材料閥門長5-10倍
德國奧萊斯OLES進口不銹鋼刀形閘閥
【進口不銹鋼刀形閘閥】特點：
本閥門為雙閘板單面密封設計，有效防止閥腔內因*積灰而造成的閥門開關不到位、卡瑟等現象。閥體采用精密鑄鋼件，密封填料采用耐磨耐高溫氟橡膠密封組件，閥板與閥座間密封面采用耐磨硬質合金材料或耐磨增韌結構陶瓷，表面光滑，硬度可達60~70HRC，解決了密封面因物料沖刷而易被沖蝕、壽命不高的問題，使用壽命比普通材料閥門長5-10倍，為用戶帶來理想的使用效果和經濟效益，大大提高了設備運行的安全性、穩定性。本閥具有密封性能好、耐磨性強、耐高溫、啟動負荷小、無卡灰或積灰現象、使用壽命長等特點。
The valve is designed for single-side sealing with double gate, which can effectively prevent the valve opening from not in place and Cather caused by long-term ash accumulation in the valve chamber. The valve body is made of precise cast steel, the sealing filler is made of wear resistant and high temperature resistant fluororubber sealing assemblies, and the sealing surface between the valve plate and the seat is made of wear resistant cemented carbide or wear resistant and toughened structural ceramics. The surface is smooth and the hardness can reach 60~70HRC. The problem that the sealing surface is easy to be eroded due to material erosion and the service life is not high is solved. Compared with ordinary material valves, the valve is 5-10 times longer, which brings ideal use effect and economic benefits to users, and greatly improves the safety and stability of equipment operation. The valve has the characteristics of good sealing performance, strong wear resistance, high temperature resistance, small start-up load, no stuck or accumulated ash, long service life, etc.
【進口不銹鋼刀形閘閥】工作原理:
當氣源從上進氣口通入時，閥桿帶動閥板向下運動，閥門關閉。當氣源從下進氣口通入時，閥桿帶動閥板向上運動，閥門開啟。閥板與閥座之間加載彈簧，彈簧彈力始終使閥板壓向閥座保證閥門的密封性，又容許閥板在垂直上下方向移動，這有助于補償閥門零件的熱脹冷縮，并能克服任何背壓變化對密封的影響與防止顆粒介質進入兩密封面之間。在啟閉過程中，閥板能產生自轉，使得密封面之間產生研磨、拋光作用，而且由于閥體對通道偏心，在開啟排卸物料時，會產生渦流，形成的物料旋渦會自行清掃閥門內腔。此閥門為雙閘板單面密封，*的下閥體斜面加鏤空下閥板設計，保證閥門內腔不積灰。所有的這些特點，使得這種閥門具有超長的使用壽命，為您的系統安全運行提供了可靠的保證。
【進口不銹鋼刀形閘閥】應用：
本閥門主要用于火力發電企業的粉煤灰氣力輸送系統中，做倉泵進料閥、平衡閥、透氣閥、排氣閥、排堵閥，也可用作卸灰閥。同時也可適用于水泥、礦山、造紙、化工等各類有磨損的干粉塵、水、蒸汽等介質在管道上作啟閉之用。
