M-200橡膠塑料滑動摩擦磨損試驗機
M-200 sliding friction and wear tester for rubber and plastics
概述：
Summary：
橡膠塑料滑動摩擦磨損試驗機是按照GB3960設計并制造。塑料滑動摩擦磨損試驗機適用于塑料制品及橡膠制品或其他復合材料的滑動摩擦，磨損性能測試。也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。是各個科研單位，大學，企業實驗室的*檢測設備。塑料滑動摩擦磨損試驗機采用計算機控制可以實時顯示摩擦系數-時間、扭矩-時間曲線，設定試驗時間，人員管理等多種功能，配有彩色打印機，可以編輯打印帶有試驗參數，試驗數據，試驗曲線等信息的試驗報告。
Rubber plastic sliding friction and wear tester is designed and manufactured according to GB3960. Sliding friction and wear test of plastic products and rubber products or other composite materials. The friction force, friction coefficient and wear amount of the sample in the test can also be measured. It is the necessary testing equipment for all scientific research institutes, universities and enterprise laboratories. The instrument adopts computer control can display the time, the coefficient of friction torque time curve, set test time, personnel management and other functions, with a color printer, you can edit print with test parameters, test data, test report test curve information report.
摩擦系數試驗機的特點
Characteristics of friction coefficient tester
1、系統運行穩定，可靠性高。
1. The system runs stably and has high reliability.
2、結構緊湊，使用方便，簡單。
2, compact structure, easy to use, simple.
3、采用高精度電機、驅動機、傳感器，精度高。
3 、 adopt high precision motor, drive machine, sensor, high precision.
4、具有試驗人員分級管理功能。
4. It has the function of grading management of test personnel.
5、實時顯示摩擦系數-時間，扭矩-時間曲線。
5. Real time display of friction coefficient time, torque time curve.
6、試驗報告可打印試驗參數，試驗數據，曲線，備注等信息，簡單，方便，可編輯。
6, the test report can print the test parameters, test data, curves, remarks and other information, simple, convenient, editable.
技術參數及精度
Technical parameters and accuracy
1、試樣尺寸 30mm*7mm*6mm±0.1 mm
1, sample size 30mm*7mm*6mm + 0.1 mm
2、轉動速度 1-200轉/分，任意可設
2, rotate speed 1-200 turn / minute, any can set
3、試驗負荷 20KG(196N± 0.2%) 可加到40KG(392N)
3, the test load 20KG (196N + 0.2%) can be added to 40KG (392N)
4、摩擦環尺寸 ￠40×10mm 倒角0.5×45°外圓表面與內圓同心度偏差小于0.01
4, the size of the friction ring of 40 * 10mm 0.5 * 45 degree chamfer surface of the outer circle and inner circle concentricity deviation is less than 0.01
5、摩擦力矩 0－4N·m
5, the friction torque of 04N - M
6、計數器 0－10000小時
6, 010000 hour counter
7、砝碼重量 4KG砝碼一件，1KG砝碼4件，可實現重量疊加功能
7, weight weight 4KG weight, 1KG weight 4 pieces, weight superposition function can be realized
8、速度精度 0.5‰
8, speed accuracy of 0.5 per thousand
9、負荷精度 5‰
9, the load accuracy is 5 per thousand
10、摩擦力矩精度 3%
10. Accuracy of friction torque 3%
11、計數器精度 0.1s
11. Counter accuracy 0.1s
12、傳感器精度 3‰
12, the sensor accuracy is 3 per thousand
13、設備重量 50KG
13. Equipment weight 50KG
